360 gamertag thread

Discuss LEGAL mods for your game systems, and turning them into portables!

Moderator:Moderators

Post Reply
will cersius
Posts:1
Joined:Mon Sep 05, 2011 2:42 pm
360 GamerTag:will cersius
Re: 360 gamertag thread

Post by will cersius » Mon Sep 05, 2011 3:59 pm

will cersius

solancoballer42
Posts:3
Joined:Tue Feb 14, 2012 4:03 pm
360 GamerTag:solancoballer42

Re: 360 gamertag thread

Post by solancoballer42 » Tue Feb 14, 2012 4:14 pm

Anyone want to join the official clan of Ben Heck? Ben said if people are intrested I can start a official Ben Heck Clan! If Ur untested let me know

solancoballer42
Posts:3
Joined:Tue Feb 14, 2012 4:03 pm
360 GamerTag:solancoballer42

Re: 360 gamertag thread

Post by solancoballer42 » Wed Feb 15, 2012 5:41 am

Interested?

Galane
Posts:17
Joined:Sat Feb 04, 2012 4:28 am

Re: 360 gamertag thread

Post by Galane » Sun Feb 19, 2012 12:42 am

KVUGNG

Just got setup on live tonight but still don't have a controller (I plugged in a keyboard) and am waiting on the new laser for the DVD drive. I was given a Xbox 360 for free, later model with built in HDMI and the heat pipe heatsink. It belonged to a very heavy smoker so it needed a bath. I took it all apart and washed everything except the hard drive with warm, soapy water and an old toothbrush, rinsed clean then put the parts in a food dehydrator at 85F for several hours to evaporate the water. No worries, I've cleaned many smoker's PCs the same way.

I got it free because the DVD drive died from secondhand smoke. First it got glitchy, then it wouldn't read any disc and the tray wouldn't open.

Hopefully boiling the belt and using some dry spray lube on the tray latch and slide will work like it did on my original Xbox. That one cost me $12 with one controller and the DVD remote - just because the tray wouldn't open. :)

I'm not cracking it open again until the laser arrives, that thing is a PITA to get apart.

MHougesen
Posts:3
Joined:Wed Sep 05, 2012 10:52 am
Steam ID:Hougesen
Location:Denmark

Re: 360 gamertag thread

Post by MHougesen » Thu Jan 17, 2013 12:20 pm

MHougesen 8)
-Mads Hougesen

Post Reply