[Unknown]
Moderator:Moderators
- SonyPortableizer
- Portablizer
- Posts:1325
- Joined:Sun Jun 01, 2008 6:49 pm
- Contact:
[Unknown]
Last edited by SonyPortableizer on Fri Nov 14, 2014 12:28 am, edited 1 time in total.
-
- Posts:1000
- Joined:Sat Jan 30, 2010 12:22 am
- PSN Username:Haunted360
- 360 GamerTag:Haunted 360
- Location:Australia
- Contact:
Re: Xbox Pinout Help
Hey, well what you do (As this is what I did) was I got my Multimeter and set it to Ohms.
Now, here are the pinout sites I found
(I dont know if you wanted xbox 1 or xbox 360 because it is confusing but I did both for you)
XBOX - http://www.hardwarebook.info/Xbox_A/V
(Another) XBOX - http://www.gamesx.com/avpinouts/xbox.htm
XBOX 360 - http://www.llamma.com/xbox360/mods/Xbox ... Pinout.htm
And what you do is get a pin (Sewing needle) and then touch one of the wires while that is connected to the - or + of the multimeter.
While doing that, touch a pin (on the MoBo - Motherboard) and if you get a reading of 0.00 then you have a complete circuit. So write that pin down (as I do, on my table )
If not, try another pint until you do them all.
This is how I figured out the screen piouts for my PS2 Laptop - I also wrote it down and will so post it on my forums - so go and check them out! (See Signature)
If you cant do it, I will be willing to do it for you (IE: Commision) for $10. I will write all the pins down into a nice and organised table for you to be sent back (As I dont have a free Xbox 1 with me - Sold it . But I do have an Xbox 360 that is able to do this, so if this is for an Xbox 360, I can figure it out for you if you like)
Anyway, thanks and hope you figure it out
Now, here are the pinout sites I found
(I dont know if you wanted xbox 1 or xbox 360 because it is confusing but I did both for you)
XBOX - http://www.hardwarebook.info/Xbox_A/V
(Another) XBOX - http://www.gamesx.com/avpinouts/xbox.htm
XBOX 360 - http://www.llamma.com/xbox360/mods/Xbox ... Pinout.htm
And what you do is get a pin (Sewing needle) and then touch one of the wires while that is connected to the - or + of the multimeter.
While doing that, touch a pin (on the MoBo - Motherboard) and if you get a reading of 0.00 then you have a complete circuit. So write that pin down (as I do, on my table )
If not, try another pint until you do them all.
This is how I figured out the screen piouts for my PS2 Laptop - I also wrote it down and will so post it on my forums - so go and check them out! (See Signature)
If you cant do it, I will be willing to do it for you (IE: Commision) for $10. I will write all the pins down into a nice and organised table for you to be sent back (As I dont have a free Xbox 1 with me - Sold it . But I do have an Xbox 360 that is able to do this, so if this is for an Xbox 360, I can figure it out for you if you like)
Anyway, thanks and hope you figure it out
Re: Xbox Pinout Help
Or, you could point him to a site like xboxscene, that actually has members and information.Haunted360 wrote:This is how I figured out the screen piouts for my PS2 Laptop - I also wrote it down and will so post it on my forums - so go and check them out! (See Signature)
If you cant do it, I will be willing to do it for you (IE: Commision) for $10. I will write all the pins down into a nice and organised table for you to be sent back (As I dont have a free Xbox 1 with me - Sold it . But I do have an Xbox 360 that is able to do this, so if this is for an Xbox 360, I can figure it out for you if you like)
http://forums.xbox-scene.com/index.php?showtopic=596642
http://forums.xbox-scene.com/index.php?showtopic=613160
- SonyPortableizer
- Portablizer
- Posts:1325
- Joined:Sun Jun 01, 2008 6:49 pm
- Contact:
Re: Xbox Pinout Help
Thanks, right now I was about to ghetto solder the VGA port, but now I do not have to
Now just to be super cautious with the power supply
Now just to be super cautious with the power supply
-
- Posts:1000
- Joined:Sat Jan 30, 2010 12:22 am
- PSN Username:Haunted360
- 360 GamerTag:Haunted 360
- Location:Australia
- Contact:
Re: Xbox Pinout Help
Yea, or you could do that...
- humakabula1
- Posts:728
- Joined:Sun May 30, 2010 3:11 am
- 360 GamerTag:H1writer
- Location:Diggi Down Under
- SonyPortableizer
- Portablizer
- Posts:1325
- Joined:Sun Jun 01, 2008 6:49 pm
- Contact:
Re: Xbox Pinout Help
Naw, I said I wanted one of the bored. I need simple pinouts, and ill screw up with that
-
- Posts:57
- Joined:Fri Oct 23, 2009 7:03 pm
Re: Xbox Pinout Help
The numbers on the diagram give above correspond directly to the numbered pins on the board. It's really not hard at all.
Re: Xbox Pinout Help
The first link in my previous post was of the pinouts at the board.SonyPortableizer wrote:Naw, I said I wanted one of the bored. I need simple pinouts, and ill screw up with that
- humakabula1
- Posts:728
- Joined:Sun May 30, 2010 3:11 am
- 360 GamerTag:H1writer
- Location:Diggi Down Under