Vista Install for MAME Not recognizing hard drive
Moderator:Moderators
- electromaster64
- Posts:265
- Joined:Mon May 31, 2004 7:09 pm
- Contact:
I have a Dual CF to IDE adaptor. I have a Kingston 16GB and 32GB card. Vista requires 20GB to install but no matter how I install them in the adaptor and no matter how I arrange the boot order in the bios Vista will only show the 16GB drive as an option for installation, which then fails as there is not enough memory. I have tried formating them as Fat32 and NTSF but nothing works. Any suggestions?
-
- Posts:29
- Joined:Sat Dec 31, 2011 4:23 pm
- PSN Username:whatchitfoool
- 360 GamerTag:whatchitfoool
- Steam ID:whatchitfoool
Re: Vista Install for MAME Not recognizing hard drive
any reason you are using vista?
MAME will run better on XP if the setup is kind of older, and will run better on 7 than vista if its newer. XP has a way smaller install footprint, and i think 7 beats it as well.
The only main reason i can think of you skipping XP is you want an x64 install.(we'll ignore that an x64 XP variant exists).
I would skip vista and use 7. either way (vista or 7), have a look here. http://www.makeuseof.com/tag/tiny-ssd-s ... -installs/" onclick="window.open(this.href);return false;
Part of the point of new file systems is to be able to use files larger than 4GB. fat32 cant do this. Exfat can, but its not open (although i think microsoft is who owns it). NTSF is what you want. And if you are using IDE, you need to make sure your bios is set to IDE or legacy, and NOT RAID or AHCI. you should not needany drivers during install if set to IDE or Legacy.
If that is all correct, i would try looking at the CF drives in an already booting computer. if they cant be seen, go into disk management and do a full reformat (not quick) in NTSF. then make sure the disk mounts and can be read and write to.
MAME will run better on XP if the setup is kind of older, and will run better on 7 than vista if its newer. XP has a way smaller install footprint, and i think 7 beats it as well.
The only main reason i can think of you skipping XP is you want an x64 install.(we'll ignore that an x64 XP variant exists).
I would skip vista and use 7. either way (vista or 7), have a look here. http://www.makeuseof.com/tag/tiny-ssd-s ... -installs/" onclick="window.open(this.href);return false;
Part of the point of new file systems is to be able to use files larger than 4GB. fat32 cant do this. Exfat can, but its not open (although i think microsoft is who owns it). NTSF is what you want. And if you are using IDE, you need to make sure your bios is set to IDE or legacy, and NOT RAID or AHCI. you should not needany drivers during install if set to IDE or Legacy.
If that is all correct, i would try looking at the CF drives in an already booting computer. if they cant be seen, go into disk management and do a full reformat (not quick) in NTSF. then make sure the disk mounts and can be read and write to.