Game Gear RGB modding

Moderator:Moderators

Post Reply
User avatar
eagle5953
Moderator
Posts:1892
Joined:Mon Jul 07, 2008 5:06 pm
360 GamerTag:eagle5953
Steam ID:eagle5953
Contact:
Game Gear RGB modding

Post by eagle5953 » Wed Feb 27, 2013 11:16 am

I haven't tried any of these mods yet, but I decided it might be helpful to have them linked here. The RGB signal appears to be 15 htz, so it should work with the PSone screen.

Chris has some mod info that's heavy on pictures if a little light on info. It does, however, feature a variable resistor for blue separation adjustment. It only applies to early Game Gears, which can be more difficult to find and identify without opening.

This mod schematic is rather intense, requiring the stacking of chips and densely packing in components, but that wouldn't be strictly necessary unless you wanted to keep the original case. Lots of additional info to be had.

Image

Finally, this guy sells a logic chip if you'd rather have a simpler time of modifying your Game Gear. It's small enough to easily fit inside the case and kicks out RGB, composite, and s-video signals. Also, it works with any version of the system.

Post Reply