Guide: Replacing official n64 analog sticks with psx/gc

Moderator:Moderators

User avatar
blaze3927
Portablizer
Posts:1114
Joined:Mon Dec 08, 2008 6:14 am
360 GamerTag:notjames
Location:Australia
Contact:
Guide: Replacing official n64 analog sticks with psx/gc

Post by blaze3927 » Thu Nov 18, 2010 3:08 am

This Guide is a WIP, i originally posted this on smashboards and will improve it/add more details in the future, please reply if you think i've missed something

Replacing Official N64 analog stick, using gamecube/psx analog sticks

Advanced modders- electronics/casework:

Read This
http://kylejw.heliohost.org/index.shtml
http://nfggames.com/forum2/index.php?topic=3574.0
basically the two links are for deciding whether your more comfortable with AVR or PIC's.

Memium level modders- casework/low level electronics

http://kylejw.heliohost.org/index.shtml
buy kylejw's pre set up chip and follow his guide for building the translator and installing a psx/gc analog

http://forums.benheck.com/viewtopic.php?f=5&t=36609
http://forums.benheck.com/viewtopic.php?t=11318
buy a superpad64 and just swap it with a psone/gamecube analog. (it uses potentiometers unlike official n64 controller)

i can use a screwdriver modders- can use a screwdriver

http://www.nintendorepairshop.com/produ ... pair-Part/
http://i102.photobucket.com/albums/m98/ ... nalog3.jpg
buy that, havent tested it personally but pic should explain.


everything that isnt in noob level requires case work with dremel, abs cement, epoxy putty/bondo, and paint for a pro looking product. it can be done with just hotglue but it'll look and probably function ****
Australian Kaillera server
[url]hhttp://i56.tinypic.com/ncb0wi.gif[/url]

Post Reply