Snesp (almost finished)

Includes but not limited to: SNES, Genesis, Sega CD, PlayStation 1, Nintendo 64, Dreamcast, Game Gear and I guess the Virtual Boy.

Moderator: Moderators

Post Reply
darthchris13
Posts: 123
Joined: Fri Sep 12, 2008 8:31 am
Location: marseille, france

Snesp (almost finished)

Post by darthchris13 » Sun Nov 30, 2008 3:01 am

Good morning, I am new, my name is chris and I am French. Definitely, after this presentation summary let us pass about the post.
I began a snep with the help of the book of ben and by gleaning from there information on the building of a super nes portable.
For now I did not have big problem except with the case which I made by technique FDM fabricate.the case is too flexible because in ABS and it was necessary to reinforce it with plastic cards and the state of surface of the case is not very nice.
Here are some pictures of work in progress.
Image
Image
Image
Image
Image
Last edited by darthchris13 on Sun Jan 18, 2009 9:10 am, edited 5 times in total.

User avatar
Neildo_64
Portablizer
Posts: 852
Joined: Sun Jan 29, 2006 9:09 pm
Location: Iowa

Post by Neildo_64 » Sun Nov 30, 2008 3:13 am

Looks awesome so far. Nice job. Take lots of pictures as you go :D .
Image
Current projects:
Ultimate N64 Guide
N64 Portable (x2)
NES Portable

darthchris13
Posts: 123
Joined: Fri Sep 12, 2008 8:31 am
Location: marseille, france

Post by darthchris13 » Sun Nov 30, 2008 4:20 am

Yes i will take pictures, no problem :)

User avatar
Kyo
Senior Member
Posts: 2470
Joined: Tue Jan 02, 2007 11:59 am
Location: Germany
Contact:

Post by Kyo » Sun Nov 30, 2008 5:24 am

cart slot relocation! Looks sweet. Good luck with it.

darthchris13
Posts: 123
Joined: Fri Sep 12, 2008 8:31 am
Location: marseille, france

Post by darthchris13 » Sun Nov 30, 2008 5:59 am

Thanks, It was not very difficult to withdraw with the iron to be welded equipped with the pomp to be unsoldered.there is a site in the rear case where I can slip the card slot.

comparison with a game gear
Image

User avatar
bacteria
Portablizer Extraordinaire
Posts: 3984
Joined: Fri Apr 20, 2007 12:14 am
Location: Hampshire, UK
Contact:

Post by bacteria » Sun Nov 30, 2008 7:31 am

Try and have more of the cart inside the system, looks like you have the room for it. Much better to have a cart enclosed than sticking out too much. Otherwise, looking good so far, and welcome to the forums!

I presume the batteries will fit on the sides of the system, behind the control buttons? (left and right sides)?
Image

darthchris13
Posts: 123
Joined: Fri Sep 12, 2008 8:31 am
Location: marseille, france

Post by darthchris13 » Sun Nov 30, 2008 11:01 am

on my first concept the cartridge was absolutely in the console but I had not place anymore for batteries, I did not want a thick console then I took back up the card slot, i made an error of comprehension and the cartridge is not in common sense, to origin they had to see the tab of this one.
Batteries will be in long under the card slot.

User avatar
jjhammerstein
Senior Member
Posts: 1562
Joined: Tue Nov 18, 2008 7:15 pm
Location: Southern CT
Contact:

Post by jjhammerstein » Sun Nov 30, 2008 11:04 am

Don't you have room on the sides, under the controls?
GET FREE WOW GOLD SEX VISIT MODRETRO


darthchris13
Posts: 123
Joined: Fri Sep 12, 2008 8:31 am
Location: marseille, france

Post by darthchris13 » Sun Nov 30, 2008 11:33 am

it is the speakers who will be put under controls, batteries will go in the bottom of the back case.Furthermore if I want to take down the card slot I have a big work to do an the back case.
Image
Image
Image
Image

User avatar
ShockSlayer
Niblet 64
Posts: 5059
Joined: Thu Jun 29, 2006 12:47 pm
Location: In my inbox.

Post by ShockSlayer » Sun Nov 30, 2008 11:54 am

Read to hard are your posts. :lol: Just kidding. I like the cable ties around the wires, keeps everything neat!

SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;

User avatar
Kyo
Senior Member
Posts: 2470
Joined: Tue Jan 02, 2007 11:59 am
Location: Germany
Contact:

Post by Kyo » Sun Nov 30, 2008 11:58 am

It does indeed. This is a very clean portable

darthchris13
Posts: 123
Joined: Fri Sep 12, 2008 8:31 am
Location: marseille, france

Post by darthchris13 » Sun Nov 30, 2008 12:52 pm

Thanks,
Read to hard are your posts. Laughing Just kidding.
Yes for sure my english is not perfect ^^.Sorry i will try to do my best in next post :p.

User avatar
SonyPortableizer
Portablizer
Posts: 1325
Joined: Sun Jun 01, 2008 6:49 pm
Contact:

Post by SonyPortableizer » Sun Nov 30, 2008 3:01 pm

As long as we can understand in the end its all good
Also very clean looking, even the insides look clean which means if you care about that which you wont be able to see in the end, then it will turn out very well
Image

User avatar
Ry_Yo
Posts: 6
Joined: Wed Sep 03, 2008 2:04 pm
Location: France

Post by Ry_Yo » Sat Dec 06, 2008 8:54 am

Très beau travail, comme tu peux le voir je suis aussi français :wink:
Nice Work, like you can see I'm also French :wink:

J'ai commencé un projet de snesp identique que celui de Brian
I began a snesp project exactly the same of Brian Project

Mais j'arrrive pas à déssouder le port cartouche, je suis débutant avec un fer à souder... J'ai acheté de la tresse mais j'arrive pas à faire fondre la soudure sur la tresse, tu pourrais m'expliquer si y'a une technique ou trucs ??? Merci :) Tu peux me répondre en MP pour éviter de parler Français sur ce forum anglais :)

But I can't unsolder the cartwrightport, I am a beginner so do you have some tricks to explain me how I can do this... I bought "braid unsolder" (???) You can send me pm to speak french because it's a public english forum :)

Merci et encore très beau travail !
Thx and Nice work again !

User avatar
Turbo Tax 1.0
Portablizer Extraordinaire
Posts: 4772
Joined: Wed Mar 30, 2005 6:19 pm
Location: Delaware, no sales tax
Contact:

Post by Turbo Tax 1.0 » Sat Dec 06, 2008 9:09 am

It looks like you have a great looking SNESp coming along. I really like your case did you make it by hand?

EDIT: I see you used FDM fabrication. How did you get a hold of the machinery to do so?
when life gives you lemons make flux
Image
snesp mk4

Post Reply