How do I wire Tactile switches to Gameboy Advance SP button and D-Pad contacts?
Thanks
Wiring Tactile switches to Gameboy SP HELP?!
Moderator:Moderators
-
- Posts:23
- Joined:Thu Oct 07, 2010 9:50 am
- 360 GamerTag:Iz Twsc
- Steam ID:ThatWeeScottishChiel
- Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
Re: Wiring Tactile switches to Gameboy SP HELP?!
Each button has two sides, one of which is always ground. Wire your tact switches to the side that is not ground on the GameBoy, and then wire the other side of your tact switches all together and connect that to ground.
I would give you more information or draw you a picture, but this is something that's been covered A LOT on the forums. If you need more help let us know.
I would give you more information or draw you a picture, but this is something that's been covered A LOT on the forums. If you need more help let us know.
dragonhead wrote:sweet. ive spent a third of my life on benheck!
-
- Posts:23
- Joined:Thu Oct 07, 2010 9:50 am
- 360 GamerTag:Iz Twsc
- Steam ID:ThatWeeScottishChiel
Re: Wiring Tactile switches to Gameboy SP HELP?!
So i solder one wire to the middle button contact then solder the other end of the wire to one of the contacts on the Tactile acting as ground. Then i solder another wire to one of the side button contacts and solder the other end of that wire to the diagonal on the Tactile switch?
Thanks for the Reply.
Thanks for the Reply.