So I just finished the cap replacement mod. Sound working great crisp and clear.
I replaced all the caps on the main board with correct values and good soldering, but my screen is still nastily washed out. Is this normal? It's a minimal improvement from what it was. I was hoping for night and day.
I'm going to go looking for some schematics and see if there isn't something else that could be done to help the black levels...
[gamegear] Caps replaced, good soldering, still washed out!?
Moderator:Moderators
-
- Posts:1
- Joined:Sat Mar 10, 2012 4:16 pm
- Tibia
- Posts:1319
- Joined:Thu Feb 28, 2008 2:02 pm
- PSN Username:Tibia1013
- Steam ID:Mulder101361
- Location:Istanbul, not Constantinople
- Contact:
Re: [gamegear] Caps replaced, good soldering, still washed out!?
You aren't going to get "night and day" improvement on the GG screen by replacing the caps. Even at its best, it's a poor screen that has always looked washed out. You can get a bit more improvement with an LED mod, but for the improvement you're looking for, it sounds like you want to do a total screen replacement.
This post brought to you by David Duchovny's glorious nipples.
Re: [gamegear] Caps replaced, good soldering, still washed out!?
no, i believe you still have to figure out the caps,(imo) did this on nomad, and it went from complete white screen to a really nice video image..keep searching for answers.. i have heard gamegear have several caps that need replacing..good luck with your project.