Really just 1, I haven't opened the SNES yet to see if the power is knocked down to 5v with a voltage regulator, but I need to run the SNES on +5v as you need a +5v load on a switcher in a JAMMA arcade cabinet to not damage it. The SNES takes 10V in the input. I suppose I could connect the negative to the -5v and the positive to the +5v to get the 10v to power the SNES.
The question is, does the SNES actually run on +5v on the board?
Building a JAMMA SNES Couple questions
Moderator:Moderators
- electromaster64
- Posts:265
- Joined:Mon May 31, 2004 7:09 pm
- Contact:
Re: Building a JAMMA SNES Couple questions
See Ben's post here and the SNES how to in my signature. That should answer some questions.
![Image](http://i1210.photobucket.com/albums/cc409/ElectromasterN64/Gameboy%20and%20Samsung%20Blackjack/GBXThumbnail.jpg)
![Image](http://i1210.photobucket.com/albums/cc409/ElectromasterN64/Arcade%20Table/c1d76cb8-f4de-4966-a753-4f9f289abf78_zps84b78ca2.jpg)
- Tighe
- Posts:41
- Joined:Mon Sep 29, 2008 10:15 pm
- 360 GamerTag:Tighe Lory
- Location:Richmondville, NY
- Contact:
Re: Building a JAMMA SNES Couple questions
I have the SNES wired up via RGB to a JAMMA fingerboard. I removed the voltage regulator and connected up the RGB. Looks like I will need to add a video amp circuit.
![Image](https://lh4.googleusercontent.com/-GuqpcuUvXHA/T8utJL5IUPI/AAAAAAAAP24/bxYAtJgjlcg/s800/IMG_20120603_134819.jpg)
![Image](https://lh4.googleusercontent.com/-GuqpcuUvXHA/T8utJL5IUPI/AAAAAAAAP24/bxYAtJgjlcg/s800/IMG_20120603_134819.jpg)