Troy's Pinball - Arcade Sequel Build

Hacking a [insert console name here] but don't see a "[insert console name here] Hacking" forum? Come on in and post your [insert console name here] questions and build logs!

Moderator:Moderators

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm
Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Thu Mar 29, 2012 9:23 pm

Before I ever plunked a quarter into any video game as a kid I had already played a fair amount of pinball, but it wasn't until I found a Williams Whirlwind machine in the early 90's that I truly knew how much I loved playing. Based off a Williams wide body machine my Google Sketchup design is now final and all the hardware/parts needed for the build are here.

Image

Image

Image

Sceptre 40" Class LCD 1080p 60Hz HDTV, X405BV-FHD, 1920 X 1080 @60hz, 16:9 Wide Screen, 8 ms, 400 (W) x 200 (H), Screen size is 35" wide x 20" high (40" diagonal)

Image

Acer S230HL Bmii 23" Class Widescreen LED Backlit Monitor - 1920 x 1080, 16:9, 100000000:1 Dynamic, 1000:1 Native, 60Hz, 5ms, HDMI, VGA

Image

AOC e1649Fwu 16" Class Ultra Slim USB Portable LED Backlit Monitor - 1366 x 768, 16:9, 500:1 Native, 60Hz, 16ms, U-Slim

Image

Below is a list of the hardware I will be using for this build followed by a picture of it all...

ZOTAC GF6100-E-E AM3 / AM2+ / AM2 NVIDIA nForce 430 MCP Mini ITX AMD Motherboard
ZOTAC ZT-50608-10L GeForce GT 520 (Fermi) 512MB 64-bit DDR3 PCI Express x1 HDCP Ready Low Profile Ready Video Card
Logitech LS11 Stereo Speakers - 2.0 Channels, 3 Watts RMS, 2" high-excursion metallic drivers
Patriot PT232GS25SSDR Torqx 2 32GB Solid State Drive - 32GB, SATA I/II
Diablotek PHD Series PHD380M 380W Micro ATX Power Supply
Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model BL2KIT12864AA804
AMD Athlon 64X2 (ADO4000IAA5DD) CPU 2.1GHZ
EVERCOOL EC-NK804A-925EP 92mm Ever Lubricate CPU Cooler for AM2 and AM3 Series

Image

Below is a Belkin 6-outlet surge protector, four pushbuttons and six lighted pushbuttons, two 120mm fans (one speed controlled), two types of red LED lighting, an HDMI and a DVI to HDMI cable, a USB internal to external cable and a 6" extension cord/power cable.

Image

This next part took a total of 51 days from the day I ordered it to receive it, so if you plan on building your own pinball machine make sure to order the Mot-Ion Adapter & Digital Plunger Kit at least two months before you know you want it.

Image

Below is what will make up most of the enclosure, it consists of one Acrylic Plexiglass Sheet Clear 3/8" x 23.7/8" x 15.7/8" and one 3/8"x 48" x 25.7/8" sheet, two sheets of OPTIX acrylic 3/16" x 18" x 24", three 8" x 1 1/2" lengths of corner Alum-Angle, four black 28" Williams pinball table legs and the mounting brackets, bolts and four leg levelers that go with them.

Image

I cut one of the 8 foot lengths of Alum-Angle in half and clamped it onto the 48"x26" sheet of 3/8" thick acrylic to use as a guide for the jigsaw.

Image

It is difficult to get an exactly straight even cut, so the side panels will be double sided taped together in preparation for sanding. The two four foot sections of Alum-Angle will be taped onto the edges as guides to keep my sanding even and let me know when to stop.

Image

Forever later and it's sanded pretty even, below shows the taped and clamped Alum-Angle / Acrylic and Mouse sander.

Image

I cut both sides of the of the marquee and sanded them like I did to the side panels. It still needs a little work, but the following picture shows just how massive this thing is.

Image

Here is the back of the 40" LCD, it will have to be removed to allow for accurate measurement of the LCD screen.

Image

Screws removed and back cover off - the speakers, IR receiver and TV side controls will all be removed and then relocated inside the body of the pinball table. While I was looking at the back of the screen I noticed that my Sceptre LCD contains parts stamped Samsung.

Image

Ok, in this next picture all the stuff I mentioned removing above has been, plus you can see where I cut away any steel bits that were in the way. I also cut two lengths of Alum-angle that will run up the edges and serve as the mounting rails for the screen.

Image

There is a rubber grommet lined hole like this in each corner of the screen, all four are ready made to be the points at which the side rails attach to the screen.

Image

I bought four nylon spacers and they fit snug against the rubber grommets inside the holes, the bolt, washer, lock washer, nut combo will hold the rails down.

Image

I cut a corner section out of the middle of one of the side rails to allow a ribbon cable to pass through. The side rails were mounted and then marked for the placement of three Alum-Angle brace rails, that were then then measured, cut and installed. Below shows the modified 40" LCD screen all finished up and ready to mount.

Image

Stay Tuned... More To Come.
Visit my site: CaseModGod.com

User avatar
thewizdawg
Posts:120
Joined:Thu Dec 18, 2008 7:05 pm
Location:O-Hi-0

Re: Troy's Pinball - Arcade Sequel Build

Post by thewizdawg » Sun Apr 01, 2012 9:20 am

NICE!!

I too have been considering building a virtual pincab. I've booked marked your site. Looking forward to your progress!

Mike

ProgMetalMan
Posts:257
Joined:Sat Feb 05, 2011 8:18 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ProgMetalMan » Sun Apr 01, 2012 11:52 am

What program are you using? I'm assuming Visual Pinball, right?
ShockSlayer wrote:Proggy's right.
ttsgeb wrote:mfw prog was not only right, but 100% so.

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Sun Apr 01, 2012 12:22 pm

I am not currently running anything, but when I'm done I plan to use HyperPin because it looks killer, to be safe I also have downloaded Visual Pinball, PinMAME, Visual PinMAME and Future Pinball.
Visit my site: CaseModGod.com

User avatar
Ashen
Posts:191
Joined:Fri May 09, 2008 8:53 am
Location:PA

Re: Troy's Pinball - Arcade Sequel Build

Post by Ashen » Sun Apr 01, 2012 2:08 pm

This project looks great man. I can't wait to see it come together.
ImageImageImageImageImageImage

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Thu Apr 12, 2012 6:29 pm

Below shows the test fit of parts that will make up the back glass and a cat who thinks that laying down on top of it all is somehow helpful. If you look closely at the 23" Acer monitor you can see a length of Alum-Angle that was initially going to be a support brace on the back of the 40" LCD TV, it is the same exact width as the 23" monitor... which means that everything should fit in nice and tight.

Image

Here is a better look at my helper, his name is Boozie... he isn't super bright but he is super friendly, so I cut him slack whenever his wacky cat antics slow me down.

Image

I cut some beefy 2" Alum-angle with my chop saw and used my disk/belt sander to smooth it up.

Image

Below shows what $100 of Alum-angle and another $100 in acrylic looks like cut up.

Image

Here is the whole thing laid out on my bed, including the legs and a bottom panel made of plywood that was cut to size and painted black.

Image

I drilled evenly spaced holes into the Alum-angle and attached all four lengths to the bottom panel using wood screws.

Image

Here is a shot of the inside of the base, the rectangular hole in the plywood orients to the front and will provide quick access to the backs of the buttons, the TV and speaker controls, fan control, etc.

Image

I got fed up with working off of my bed and dining room table, since I have more projects going on than we ever do guests staying over it really was a no brainer - goodbye guest bedroom, hello new workshop. Below is the view from the front door looking in...

Image

Directly to the left of the last picture...

Image

Left again, the door in the corner is a closet...

Image

Take one last left and we have the entry door and an exterior door... and that concludes the tour of my workshop. Now that I have a dedicated work space where I am not constantly getting stuff out and then having to put it away each night should help speed everything up

Image
Visit my site: CaseModGod.com

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Wed Apr 25, 2012 8:44 pm

I decided to make a couple of hardware changes, first up I am ditching the 2GB of Crucial Ballistix memory in favor of 4GB of Kingston Hyper-X, because more is better and they are lower latency. Secondly, the Logitech speakers work great in my MAME machine, but they are right in your face. At 1.5w per speaker I can't imagine they'd sound as good four feet away, another negative is the volume control knob would have stuck out from the back glass. My new Creative Inspire T3130 speakers are 25w total with 5w each satellite and 15w for the subwoofer are a better fit for this project and the volume controls can now be easily hidden.

Image

I finished drilling mount holes in the Alum-angle and then double side taped each piece onto the acrylic side panels to use as drilling templates. I have a set of drill bits that are specifically for plastic and acrylic and mention it only because they are crucial to achieving professional results when working on stuff like this... besides, it doesn't make sense to risk cracking a hundred dollars worth of 3/8" acrylic over a nine dollar specialty drill bit.

Image

Here the side panels have been drilled and are mounted to the base for a test fit and everything so far fits good.

Image

Below is the inner leg brace, since it fits tight already I only need to drill out the center holes on the side edges of the brace to permanently attach them.

Image

The back side panel is cut from pressboard and the first piece of the two part front panel is cut from a sheet of .220 Optix acrylic, below shows both attached for a test fit. I also bought a piece of black molding from a Williams wide body pinball machine that secures the back edge of the table glass, I cut it to size and it is sitting in place on the top edge below.

Image

I cut the second piece of 3/16 acrylic sheet for the front panel, below shows a top down view.

Image

The reason the front panel had to be two sheets thick will become apparent when I mount the speakers from the TV and the five recessed LED buttons. The two white pieces of paper show where I Intend to mount the TV speakers.

Image

I had to thicken up the back material so that the pinball table legs will seat correctly, for this I used the same 3/16" acrylic as the front panels. Sadly, in figuring out that the thickness of the rear material mattered when mounting the legs I destroyed two bolts and a leg mounting plate, I am currently awaiting delivery of replacements.

Image
Visit my site: CaseModGod.com

nevermind1534
Senior Member
Posts:1977
Joined:Fri Feb 06, 2009 1:36 pm
Steam ID:nevermind1534
Location:Detroit, MI
Contact:

Re: Troy's Pinball - Arcade Sequel Build

Post by nevermind1534 » Wed Apr 25, 2012 9:34 pm

Looks good so far! I also like that you're building it out of MDF.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"

User avatar
Muniosi
Posts:221
Joined:Mon Dec 27, 2010 3:37 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by Muniosi » Thu Apr 26, 2012 1:48 pm

Beautiful work so far, man. Can't wait till it's done.

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Thu Apr 26, 2012 2:03 pm

@ nevermind1534,

Thanks. But only the back will be MDF, the rest of it is made of sweet, sweet acrylic... it only looks like MDF because the paper is still on it.

@ Muniosi,

Thanks, I can't wait til It's done myself.
Visit my site: CaseModGod.com

nevermind1534
Senior Member
Posts:1977
Joined:Fri Feb 06, 2009 1:36 pm
Steam ID:nevermind1534
Location:Detroit, MI
Contact:

Re: Troy's Pinball - Arcade Sequel Build

Post by nevermind1534 » Thu Apr 26, 2012 9:02 pm

ARTbyTROY wrote:@ nevermind1534,

Thanks. But only the back will be MDF, the rest of it is made of sweet, sweet acrylic... it only looks like MDF because the paper is still on it.
Got it. I like acrylic, too. It looks like it should turn out pretty well.
Kyo wrote:"does anyone here know how to fly a plane?"

"STAND BACK EVERYBODY, I HAVE A FAKE ID"

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Fri May 04, 2012 5:41 pm

I cut and rivet together a few pieces of Alum-angle as the start of a simple mounting base for the motherboard and video card. The four screws will secure the motherboard to the wood base of the pinball table and the zip tie is there to hold the video card in place.

Image

To prevent the motherboard from ever flexing I cut and bolt down a couple cross braces, I chose to bolt the cross braces on instead of riveting because if the motherboard mounting holes don't line up perfectly the bolts will adjust way easier than resetting rivets.

Image

I installed the processor, CPU fan, video card and memory into the motherboard, I also plugged in a SATA cable, an external USB and I used an old four wire audio cable over the power switch and power LED pin-outs on the motherboard... this thing will be ready to be mount permanently in the cabinet after I install the OS, drivers and software.

Image

Next up is trying to find the best places inside the table for the hardware. I cut and drilled a strip of 1/2" Alum-angle and attached it to the bottom of a speed adjustable 120mm fan, it will sit up front and blow back. Sitting just behind the fan is a Logisys power distribution box, then the motherboard, and behind that is the 6 outlet surge protector and the power supply. The power supply will be ducted to the rear, as will the subwoofer (shown still covered in plastic).

Image
Visit my site: CaseModGod.com

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Sun May 06, 2012 8:44 pm

Alum-angle on the bottom of the PSU to mount it and a duct to the rear to provide cool air, I will probably also use some double sided tape on the bottom of the PSU to make sure it stays put as well as rubberize the PSU edge of the duct against vibration.

Image

Off with the legs! Removing the legs from the subwoofer allows it to sit at nearly the same distance away from the pinball table interior side wall as it sat with legs... without interfering with a couple other things I have planned.

Image

Below shows the three pieces of Alum-angle that I cut to secure the subwoofer, they will all be lined with felt to prevent vibration before the sub is final installed.

Image
Visit my site: CaseModGod.com

User avatar
Muniosi
Posts:221
Joined:Mon Dec 27, 2010 3:37 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by Muniosi » Mon May 07, 2012 9:53 am

Looks great!

User avatar
ARTbyTROY
Posts:35
Joined:Thu Sep 09, 2010 3:33 pm

Re: Troy's Pinball - Arcade Sequel Build

Post by ARTbyTROY » Tue May 08, 2012 6:18 pm

@ Muniosi, Thanks!

I measured out where a few holes needed to be cut in the back panel and predrilled pilot holes using an 1/4" bit for plastics, then I run the hole saws first forward to cut the pressboard and then in reverse to cut through the acrylic.

Image

Below is the back panel with the holes drilled and the hardware that required those holes installed, everything lines up even better than I expected. The blue-green PSU duct will be vinyl dyed black and a black plug for the power cord was added after realizing that the hole I cut was the exact same diameter as the plug I had.

Image

Next up is a look from the inside with the sub-woofer and PSU installed, since I no longer plan to attach the six outlet surge suppressor to the back panel I will need to figure out another way to secure it... a fair trade for how clean the back looks.

Image
Visit my site: CaseModGod.com

Post Reply