Guide/Info Database for Making Arcade Cabinets

Hacking a [insert console name here] but don't see a "[insert console name here] Hacking" forum? Come on in and post your [insert console name here] questions and build logs!

Moderator:Moderators

Post Reply
User avatar
CronoTriggerfan
Moderator
Posts:4131
Joined:Fri Jan 27, 2006 3:07 pm
Location:University of Michigan - Ann Arbor
Contact:
Guide/Info Database for Making Arcade Cabinets

Post by CronoTriggerfan » Sat Dec 09, 2006 2:06 pm

Seeing as every other thread has a "how-to" info database, this one should, too! :)

The MAME cabinet built in 24 hours
Exactly like it sounds. :lol: It's a how-to/making of site.

Arcade Controls
This site has a TON of info on wiring, cabinet building, and of course, custom controls! The end-all, be-all source.

The Console gone Arcade!
This is my personal favorite, the NES arcade. No, not emulation; it plays NES carts!

Step-by-step guide!
Thanks khagg!
robivy64 wrote:Definitely helps out with the Metal Slug games. I did this mod a good while back but finally shook off my laziness and wrote a guide. Enjoy!

http://www.undergroundcm.com/index.php? ... &Itemid=49

Video of Metal Slug 2 running at 16 MHz (44 MB):

http://www.99-gtp.com/ucm/videos/MS2_at_16MHz.mpg
That's all from me (for now). If you guys have any cool, completed arcade projects that you liked, or any good information on building arcade cabs, paste it here!

Thanks,
CTFan
Last edited by CronoTriggerfan on Thu Jun 14, 2007 1:06 pm, edited 3 times in total.

User avatar
arfink
Posts:500
Joined:Wed Oct 19, 2005 8:12 pm
Location:Minnesota

Post by arfink » Tue Dec 19, 2006 1:48 pm

Hey all, here is a website I made about my arcade project. It's kinda messy beause I suck at making websites, but it's there along with some good pictures.

http://personal.stthomas.edu/arfink/projects.htm

If you have questions PM me, don't put them in this thread.
Emulation isn't accurate. There is no substitute for real hardware!

User avatar
ganonbanned
Senior Member
Posts:2211
Joined:Thu Feb 16, 2006 5:58 pm
Location:Wisconsin
Contact:

Post by ganonbanned » Fri Dec 29, 2006 2:38 pm

wow, thanks CTfan! the 24-hour guide will definetly be useful

User avatar
ganonbanned
Senior Member
Posts:2211
Joined:Thu Feb 16, 2006 5:58 pm
Location:Wisconsin
Contact:

Post by ganonbanned » Fri Dec 29, 2006 4:32 pm

guide from my Basic understandings: (Delete if Im not correct)

1: Get an old PC, about 500 MHZ

2: Get a video card with RCA output on the PC

3: Install MAME and all of the games you want, or get an emulator, a program that will automatically boot the emu, etc.

4: Build a cabinet. (dont ask me how to)

5: Controll:
you need an old keyboard that you never want to use again. Put in the keys that you to use on the Emulator. Build the board with all of the buttons and joysticks, spinners and trackballs that you want .For the buttons and joysticks, take the wires for all of the switched from the parts, and solder them onto their respective keys on the keyboard.

6: Mount the TV in the cabinet so that only the screen is visible, if possible.

7: For power, you can just plug everything on the inside into a power strip. get an extension cord coming out of the thing.

8:paint, add detail.

or, you could do a dreamcast, which would be easier but probably not as cool.

User avatar
khaag
Senior Member
Posts:2261
Joined:Sat Mar 18, 2006 7:54 pm
Location:C eh N eh D eh
Contact:

Post by khaag » Fri Dec 29, 2006 6:00 pm

ganonbanned wrote: 5: Controll:
you need an old keyboard that you never want to use again. Put in the keys that you to use on the Emulator. Build the board with all of the buttons and joysticks, spinners and trackballs that you want .For the buttons and joysticks, take the wires for all of the switched from the parts, and solder them onto their respective keys on the keyboard.
You can't do this, because a keyboard uses a matrix to determine what button keys are pressed. There aren't switches that you can solder to, on most keybords that i've ever seen anyways.
[url=http://thekevbot.com]Portfolio[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]

User avatar
ganonbanned
Senior Member
Posts:2211
Joined:Thu Feb 16, 2006 5:58 pm
Location:Wisconsin
Contact:

Post by ganonbanned » Fri Dec 29, 2006 11:55 pm

khaag wrote:
ganonbanned wrote: 5: Controll:
you need an old keyboard that you never want to use again. Put in the keys that you to use on the Emulator. Build the board with all of the buttons and joysticks, spinners and trackballs that you want .For the buttons and joysticks, take the wires for all of the switched from the parts, and solder them onto their respective keys on the keyboard.
You can't do this, because a keyboard uses a matrix to determine what button keys are pressed. There aren't switches that you can solder to, on most keybords that i've ever seen anyways.
How would I do controls than?

User avatar
khaag
Senior Member
Posts:2261
Joined:Sat Mar 18, 2006 7:54 pm
Location:C eh N eh D eh
Contact:

Post by khaag » Sat Dec 30, 2006 2:56 am

You would either have to hack the keyboard to use the keyboard encoder inside of it, although I don't reccomend it because it is quite difficult and if you do it wrong, you can f*** up your motherboard. Or you can buy a keyboard encoder designed for use in building arcade controls. this is the one I used for mine. (called the KeyWiz Max) It works very well and by defult settings, is set to MAME's default key mapping for 2 players.

Wow! That was a long post to type on the Wii. My arm is very sore!:D lol

khaag

EDIT: Here is an awsome website devoted to building MAME cabinets. It is where I got all my info to build my cabinet, which is almost complete (just need to paint it). It really is the ultimate cabinet site! :D
[url=http://thekevbot.com]Portfolio[/url]
[url=http://twitter.com/thekevbot]Twitter[/url]
[url=http://blog.thekevbot.com]Blog[/url]

User avatar
arfink
Posts:500
Joined:Wed Oct 19, 2005 8:12 pm
Location:Minnesota

Post by arfink » Thu Jan 04, 2007 9:18 am

Actually, hacking the encoder of a keyboard can't hurt your computer. If anything goes wrong it's about the same as plugging a normal keyboard into your computer and pounding/mashing all the keys at the same time for several hours. Just reset your PC and everything will go back to normal. Trust me, I did this to a keyboard for the interface for my arcade machine and it worked fine. I would reccomend getting as old of a keyboard as you can find, these are usually easyer to hack because of the way the matrix films plug into the keyboard PCB. I have lots of pics and info on my project here:

http://personal.stthomas.edu/arfink/

The website isn't really done, but the arcade project section is almost completely done.

I used the keyboard for player 1, and a hacked up 4 button gravis gamepad for player 2. If you can portablieize it's easy to figure out how to make arcade controls interface to these devices.
Emulation isn't accurate. There is no substitute for real hardware!


User avatar
CronoTriggerfan
Moderator
Posts:4131
Joined:Fri Jan 27, 2006 3:07 pm
Location:University of Michigan - Ann Arbor
Contact:

Post by CronoTriggerfan » Thu Jun 14, 2007 1:06 pm

Updated! :P

CTFan
Image

User avatar
rikitheshadow
Posts:315
Joined:Fri May 09, 2008 12:15 am

Re: Guide/Info Database for Making Arcade Cabinets

Post by rikitheshadow » Wed Dec 23, 2009 10:22 pm

Should add this site to the list of vendors.

http://jammaboards.com/store/index.php" onclick="window.open(this.href);return false;

They don't have a lot, but provide a number of electrical items, buttons, joysticks, speakers, occasionally PCBs, and JAMMA harnesses. Parts that essentially make up a large percentage of any JAMMA arcade cab.

Their main site also provides reference to and about all known JAMMA boards and wiring diagrams for the harnesses.

Post Reply