I am wokring on my laptop and I was wondering for internal power supply where do I screw in the ground wire? Should I screw it into the metal frame of the mother board it self? or do I screw it into the acrylic case/
Where is it supposed to go?
Where to ground inside ?
Moderator:Moderators
- LoyalistRevolt
- Posts:515
- Joined:Sat Aug 18, 2007 7:37 pm
- Location:SugarLand, TexMex
- Contact:
- mothatrucka
- Banned
- Posts:588
- Joined:Sun May 04, 2008 12:21 pm
- thehackerinside
- Posts:198
- Joined:Fri Jul 27, 2007 3:43 pm
- Location:Hastings, England
- Contact:
A PS3 laptop , Good luck !
Any of the screws holes should work fine as I'm sure that whole edge of the metal thing is touching the grounding strip round the edge of the MB
Yeah it touching the edge so the screw holes will work as long as the metal shielding thing is still attached if not just solder straight onto the grounding strip.
Joe
Any of the screws holes should work fine as I'm sure that whole edge of the metal thing is touching the grounding strip round the edge of the MB
Yeah it touching the edge so the screw holes will work as long as the metal shielding thing is still attached if not just solder straight onto the grounding strip.
Joe