The Afternoon projects thread.

Show off your completed projects, announce your hacking progress, or discuss upcoming events.

Moderator:Moderators

Post Reply
User avatar
lifeisbetterwithketchup
Senior Member
Posts:2180
Joined:Fri Jul 21, 2006 12:08 pm
Steam ID:lifeisbetterwithketchup
Location:Illinois. Whee.
Contact:
Re: The Afternoon projects thread.

Post by lifeisbetterwithketchup » Sun Apr 10, 2011 12:21 pm

bicostp wrote: Parts harvested so far: a few EEPROMs, an EPROM, some microcontrollers, Analog Devices D/A converters, assorted surface mount components, assorted through-hole discrete components, and a couple dozen DIP sockets (only a couple of which I've completely ruined Image).
Total brain cells lost: both of them
I don't suppose one of those Analog Devices chips was a AD9889B, but if so, I'm interested in it. :lol:
Rekarp wrote:
mako321 wrote:What makes you head ninja, anyways? :wink:
Cause I am Abe F#!@ing Lincoln. :mrgreen:

User avatar
humakabula1
Posts:728
Joined:Sun May 30, 2010 3:11 am
360 GamerTag:H1writer
Location:Diggi Down Under

Re: The Afternoon projects thread.

Post by humakabula1 » Wed Apr 13, 2011 5:11 am

i jammed a nh-d14 into my desktop a couple of days ago.
Image
The new one is on the left, my old one is on the right (not my pic, same parts though)
Wedgix (custom linux distro): 20% complete

User avatar
Chezwik
Posts:45
Joined:Sat Mar 13, 2010 6:23 pm
PSN Username:Itsumofataride
360 GamerTag:Chezwik74
Location:The True Mountain state, Colorado

Re: The Afternoon projects thread.

Post by Chezwik » Sun May 01, 2011 11:01 am

Did a steampunk style mod to my wii. trying to figure out if i want to put any light or gauges in it, just for giggles. not that big into steampunk, but after seeing that bronze paint and a quick internet search, it just seamed right. It looks better then the picture leads it to be. really bad lighting in my house

Image
He who does things in wrong order
If i can't RROD my Xbox once a week, I'm doing it wrong

Current Projects -
Cheztendo64 - In design Phase

Spoiler:
BOO

Snow_Cat
Posts:463
Joined:Fri Aug 13, 2010 12:40 pm
Steam ID:Snow_Cat
Location:Here
Contact:

Re: The Afternoon projects thread.

Post by Snow_Cat » Sun May 01, 2011 11:26 am

Put an gauge /w RC circuit on the drive active light.

User avatar
Chezwik
Posts:45
Joined:Sat Mar 13, 2010 6:23 pm
PSN Username:Itsumofataride
360 GamerTag:Chezwik74
Location:The True Mountain state, Colorado

Re: The Afternoon projects thread.

Post by Chezwik » Sun May 01, 2011 4:00 pm

That could be cool. and shouldn't be to terribly difficult
He who does things in wrong order
If i can't RROD my Xbox once a week, I'm doing it wrong

Current Projects -
Cheztendo64 - In design Phase

Spoiler:
BOO

User avatar
Biased
Posts:439
Joined:Mon Feb 16, 2009 6:29 pm
Location:Perham, Minnesota

Re: The Afternoon projects thread.

Post by Biased » Wed May 04, 2011 8:41 pm

Chezwik wrote:That could be cool. and shouldn't be to terribly difficult
I say: Put some sort of gold or green-colored LED work on the case for a nice extra touch if you're brave enough.

User avatar
humakabula1
Posts:728
Joined:Sun May 30, 2010 3:11 am
360 GamerTag:H1writer
Location:Diggi Down Under

just made this

Post by humakabula1 » Thu May 12, 2011 1:43 am

Image
the keyring that is

MOD EDIT: Merged with afternoon projects thread, thats why its here :roll:
Wedgix (custom linux distro): 20% complete

User avatar
marshallh
Moderator
Posts:2986
Joined:Sat Sep 10, 2005 2:17 pm
360 GamerTag:marshallh
Location:here and there
Contact:

Re: The Afternoon projects thread.

Post by marshallh » Thu May 12, 2011 7:26 pm

finished a project today, drill press vice

poured aluminum and did all the machining myself on WW2-era tools

Image
Image

Snow_Cat
Posts:463
Joined:Fri Aug 13, 2010 12:40 pm
Steam ID:Snow_Cat
Location:Here
Contact:

Re: The Afternoon projects thread.

Post by Snow_Cat » Thu May 12, 2011 11:12 pm

nice!

User avatar
Mario
Posts:1383
Joined:Mon Mar 05, 2007 7:20 pm
Location:Sunny California

Re: The Afternoon projects thread.

Post by Mario » Fri May 13, 2011 9:32 pm

Wow, that's really nice.

Okay, maybe some of you remember my weed whacker-powered bike. It's biggest flaw was that there was no clutch. Well, after the brackets holding the motor on the bike started to get loose to the point where it'd no longer work, I had a good excuse to rebuild the mounts with a clutch.

What I did was have one side pivot with a bungee cord to pull the motor up. I re-attached the pedals, cut the main sprocket in half, and attached one half to the pedals and the other to the motor. I then cut the original chain I had saved from it and used that to connect the two sprocket halves. Check out the pictures, it'll make much more sense.

Image

One half of the sprocket, with the chain attached:
Image

The other half on the motor. When the pedal is pushed down, the chain pulls the motor down onto the tire.
Image

Image

Image

Also, since I get so much leverage with this setup, the peg gets much more grip. I can start it by rolling down a small hill and tapping the motor onto the tire.
Image

User avatar
Triton
Moderator
Posts:7397
Joined:Mon May 24, 2004 12:33 pm
360 GamerTag:triton199
Steam ID:triton199
Location:Iowa
Contact:

Re: The Afternoon projects thread.

Post by Triton » Fri May 13, 2011 10:21 pm

very nice effective solution on a limited budget! if you ever want to do it up proper you can get clutches from northern tool for under 50$ shipped, i've got a similar project planned, using bicycle parts and a 3hp tecumseh 2 cycle snowblower engine. its going to be built in the style of teens and twenties era boardtrack racers much like this indian :D
Image

User avatar
Triton
Moderator
Posts:7397
Joined:Mon May 24, 2004 12:33 pm
360 GamerTag:triton199
Steam ID:triton199
Location:Iowa
Contact:

Re: The Afternoon projects thread.

Post by Triton » Tue May 17, 2011 10:02 pm

Today since i was working on my car (and had it up on jackstands with the wheels off etc) anyway i decided to get a project i have had planned out of the way. I decided to build a control arm brace for the front suspension. it is VERY easy to do on this car, and cheap too! you need:
1" EMT conduit (10' for ~8$)
2 grade 8 1/2" washers (~50 cents each)
a saw (i used our sawsall)
a large hammer
a bench vice
some sand
ducktape
spray paint

and this is the result of maybe half an hours work and a grand total of about 9 dollars :mrgreen:
Image
and installed on the car it looks like this
Image

User avatar
rikitheshadow
Posts:315
Joined:Fri May 09, 2008 12:15 am

Re: The Afternoon projects thread.

Post by rikitheshadow » Thu May 19, 2011 2:19 am

Been a while since I posted anything. This isn't really an afternoon project I did because I was at work, but sometimes I spend my nights like afternoons catching up on all the work on projects I haven't been able to get to. So I got two 25" CRT tubes sitting in my room........with the rest of my junk....crowding my path ways

My project consisted of removing a bonded yoke from a 25" CRT (tube), which I attempted with a 12v battery charger for a car set at 2 amps for 15 min across the Horizontal Winding.....It didn't really much help at all......ended up just breaking the Yoke off, poor thing. Oh wells, me and a couple of experts at KLOV couldn't match it to anything so it was a mystery yoke and tube. Tube is ok though I got to plan out a new yoke and chassis...........................

Along side that I pulled one of my 25" CRT (tube, chassis, and all) from this Virtua Fighter cab I got off craigslist for $100, the previous owner said he used to repair the things, but he was burnt out on stuff like that so someone else had repaired this. Well it turns out the old monitor up and died, and for some reason they chunked it and replaced it with a standard resolution chassis and yoke.............Idiots, Virtua Fighter alone is a Medium Resolution game but they didn't even bother hooking up an isolation transformer. Well I debugged this odd chassis and it turned out to be a 25K7000 Wells Gardner, it only blew a fuse thank god. Would of destroyed more components if it hadn't of done that without it's ISO.

Bonded Yoke Removal BEFORE
Image

Bonded Yoke Removal AFTER
Image


25K7000 Wells Gardner Up and Running (taken with phone)
Image

Snow_Cat
Posts:463
Joined:Fri Aug 13, 2010 12:40 pm
Steam ID:Snow_Cat
Location:Here
Contact:

Re: The Afternoon projects thread.

Post by Snow_Cat » Thu May 19, 2011 11:48 am

^ ^ ^ ^ Another screen is saved!

User avatar
Mario
Posts:1383
Joined:Mon Mar 05, 2007 7:20 pm
Location:Sunny California

Re: The Afternoon projects thread.

Post by Mario » Sat May 28, 2011 5:03 pm

There was this cover to an exit sign leaning against a white board in one of my classes at school. I told my friend I wanted it, so he went up and took it like a boss. :P I used a laptop diffuser panel, LEDs, and some diffusion sheets to make it light up.
I was going to make it just red, but my red LED's aren't that bright. So I made it rainbow. :awesome:

The sign cover:
Image

Diffuser panel with a reflective sheet behind it:
Image

LED's all glued on with resistors:
Image

Image

And hanging over my door:
Image

My camera kinda sucks, so the colors look washed out. They're pretty vibrant, though.
Image

Post Reply