design (no longer being used, might use for snes portable)

Yes it is nice to be able to put your projects INSIDE something isn't it? You know, to hold everything together so it doesn't flop around? Discuss the techniques here!

Moderator:Moderators

Post Reply
User avatar
MigueLLLLL
Posts:197
Joined:Sun Mar 14, 2010 4:34 pm
PSN Username:migueIII
Location:my basement workshop!
design (no longer being used, might use for snes portable)

Post by MigueLLLLL » Thu Mar 18, 2010 5:56 pm

right so i just ordered a sample of a case i am going to use and i used paint to draw what i want it to look like (im very sloppy so dont laugh)
Attachments
diagram.jpg
its not the greatest but i think you get the idea :)
diagram.jpg (205.87KiB)Viewed 5396 times
Last edited by MigueLLLLL on Mon Mar 22, 2010 4:25 pm, edited 1 time in total.
work log: http://forums.benheck.com/viewtopic.php?f=5&t=36959" onclick="window.open(this.href);return false;
Talakoski wrote: Where did you get those copper things over the Heat Sinks?
samjc3 wrote:just for the record, those "copper things over the heatsinks" are the heatsinks. :wink:
Top
User avatar
budnespid
Posts:388
Joined:Thu Feb 18, 2010 9:44 pm
Location:South, Deep Deep down South

Re: what i hoping my project will look like (don't laugh!)

Post by budnespid » Thu Mar 18, 2010 6:29 pm

Wheres the cartridge slot?
Top
User avatar
bassmasta
Posts:684
Joined:Sun Sep 06, 2009 8:56 pm
Steam ID:randomguy737
Contact:
Contact bassmasta

Re: what i hoping my project will look like (don't laugh!)

Post by bassmasta » Thu Mar 18, 2010 6:33 pm

budnespid wrote:Wheres the cartridge slot?
In the back.

To migueLLLL: Scale down your pictures bud. Not everyone has superwide monitors.
zeturi wrote:If you're getting 404'd when trying to use the links in stickies, try this tutorial to find that juicy info.
Top
Goldy
Posts:43
Joined:Wed Mar 10, 2010 6:32 pm

Re: what i hoping my project will look like (don't laugh!)

Post by Goldy » Thu Mar 18, 2010 6:40 pm

wouldn't the charger and headphones ports be blocked by your hand if you want to play it while charging/using headphones?

Also you will want video out somewhere too, else no point in the 3 extra controller connectors, wouldn't be fun playing multiplayer on that screen.
Top
User avatar
MigueLLLLL
Posts:197
Joined:Sun Mar 14, 2010 4:34 pm
PSN Username:migueIII
Location:my basement workshop!

Re: what i hoping my project will look like (don't laugh!)

Post by MigueLLLLL » Fri Mar 19, 2010 8:08 am

my bad i dont know how to resize it and that's a good point i might put them next to the controller plugs
thanks for the feedback
work log: http://forums.benheck.com/viewtopic.php?f=5&t=36959" onclick="window.open(this.href);return false;
Talakoski wrote: Where did you get those copper things over the Heat Sinks?
samjc3 wrote:just for the record, those "copper things over the heatsinks" are the heatsinks. :wink:
Top
User avatar
Nintendo65Portable
Posts:48
Joined:Mon Mar 08, 2010 11:17 pm

Re: what i hoping my project will look like (don't laugh!)

Post by Nintendo65Portable » Fri Mar 19, 2010 3:02 pm

I like your idea Migue, It looks good but you shouldent have the charger and headphone jacks interfering with you gamplay, so move them for a better to use portable.
Oh! I just got a free sample from those guys yesterday!, Hope it comes ;P
Top
User avatar
MigueLLLLL
Posts:197
Joined:Sun Mar 14, 2010 4:34 pm
PSN Username:migueIII
Location:my basement workshop!

Re: what i hoping my project will look like (don't laugh!)

Post by MigueLLLLL » Fri Mar 19, 2010 3:37 pm

im about to order ( i forgot to yesterday) how long is shipping ?
work log: http://forums.benheck.com/viewtopic.php?f=5&t=36959" onclick="window.open(this.href);return false;
Talakoski wrote: Where did you get those copper things over the Heat Sinks?
samjc3 wrote:just for the record, those "copper things over the heatsinks" are the heatsinks. :wink:
Top
Post Reply

Return to “Case Construction”