NOAC case
Moderator:Moderators
i was first planning to make an snes portable this summer than i saw the superjoy 3 and i was wondering if this case would be good enough for it and if it is can some one sugest me a sutable screen thanks. The case is the sl 64P from polycase.com http://www.polycase.com/images/cache/sl64p-item-0-0.jpg" onclick="window.open(this.href);return false;
☆┌─┐ ─┐☆
│▒│ /▒/
│▒│/▒/
│▒ /▒/─┬─┐
│▒│▒|▒│▒│
┌┴─┴─┐-┘─┘
│▒┌──┘▒▒▒│
└┐▒▒▒▒▒▒┌┘
└┐▒▒▒▒┌┘ Peace
│▒│ /▒/
│▒│/▒/
│▒ /▒/─┬─┐
│▒│▒|▒│▒│
┌┴─┴─┐-┘─┘
│▒┌──┘▒▒▒│
└┐▒▒▒▒▒▒┌┘
└┐▒▒▒▒┌┘ Peace
-
TheOnlyOneHeFears
- Portablizer
- Posts:396
- Joined:Mon Oct 16, 2006 9:53 am
- Location:Here be Dragons!
Re: NOAC case
If I'm not mistaken, that's the same case Life of Brian was using for his NESp (or one very similar), so I'd say yes, it's a good case 
You'll want to use a LCD controller screen (Hip Gear/Intec, if you can find one) or one of those 2.5 inch 12V screens that are always on eBay
You'll want to use a LCD controller screen (Hip Gear/Intec, if you can find one) or one of those 2.5 inch 12V screens that are always on eBay
Re: NOAC case
ok thanks for that answer so i can just get that case and screen now, thanks again
☆┌─┐ ─┐☆
│▒│ /▒/
│▒│/▒/
│▒ /▒/─┬─┐
│▒│▒|▒│▒│
┌┴─┴─┐-┘─┘
│▒┌──┘▒▒▒│
└┐▒▒▒▒▒▒┌┘
└┐▒▒▒▒┌┘ Peace
│▒│ /▒/
│▒│/▒/
│▒ /▒/─┬─┐
│▒│▒|▒│▒│
┌┴─┴─┐-┘─┘
│▒┌──┘▒▒▒│
└┐▒▒▒▒▒▒┌┘
└┐▒▒▒▒┌┘ Peace
-
Life of Brian
- Moderator
- Posts:2867
- Joined:Wed Aug 03, 2005 5:55 pm
- Location:Oklahoma
- Contact:
Re: NOAC case
Grahf is the one who has actual experience working with it. I ordered a couple but I haven't actually cut any up yet. With a NOAC you should be fine with just about any cheap 2.5 or 3" LCD screen if it looks like it's not too thick.
dragonhead wrote:sweet. ive spent a third of my life on benheck!
-
palmertech
- Senior Member
- Posts:3225
- Joined:Sat Feb 02, 2008 1:40 am
- Location:California, land of the homeless and hippies
- Contact:
