Yes it is nice to be able to put your projects INSIDE something isn't it? You know, to hold everything together so it doesn't flop around? Discuss the techniques here!
5 posts • Page 1 of 1
i was first planning to make an snes portable this summer than i saw the superjoy 3 and i was wondering if this case would be good enough for it and if it is can some one sugest me a sutable screen thanks. The case is the sl 64P from polycase.com http://www.polycase.com/images/cache/sl64p-item-0-0.jpg" onclick="window.open(this.href);return false;
- Posts: 396
- Joined: Mon Oct 16, 2006 9:53 am
- Location: Here be Dragons!
If I'm not mistaken, that's the same case Life of Brian was using for his NESp (or one very similar), so I'd say yes, it's a good case You'll want to use a LCD controller screen (Hip Gear/Intec, if you can find one) or one of those 2.5 inch 12V screens that are always on eBay
Grahf is the one who has actual experience working with it. I ordered a couple but I haven't actually cut any up yet. With a NOAC you should be fine with just about any cheap 2.5 or 3" LCD screen if it looks like it's not too thick.
dragonhead wrote:sweet. ive spent a third of my life on benheck!