WTB: good 5" screen for around 80$ shipped

Looking for a special part, or have extra stuff you don't need? Trade, sell and buy it here. (Note: Transactions are not monitored by benheck.com)

Moderator: Moderators

Post Reply
sammy
Posts: 568
Joined: Thu Dec 08, 2005 3:13 pm

WTB: good 5" screen for around 80$ shipped

Post by sammy » Fri Aug 24, 2007 1:31 pm

Problem: I live in Europe.
Anyone have a decent 5" screen (psone would be nice), with composite input and in good working condition?
I would like to give around 80$ for it shipped but off course we can negotiate on that matter.

User avatar
dudex77
Posts: 1499
Joined: Thu Nov 16, 2006 10:43 am
Location: Spain
Contact:

Re: WTB: good 5" screen for around 80$ shipped

Post by dudex77 » Fri Aug 24, 2007 2:03 pm

I have a pal screen if that's what your looking for.
Kurt_ wrote: I would use tact switches but I want the mushy feel. Mushy = God. (I typed that correctly).
Image

jeroen
Senior Member
Posts: 1573
Joined: Mon Oct 10, 2005 7:42 am
Location: The Netherlands

Post by jeroen » Fri Aug 24, 2007 2:10 pm

I kinda also need a pal one.

User avatar
dudex77
Posts: 1499
Joined: Thu Nov 16, 2006 10:43 am
Location: Spain
Contact:

Post by dudex77 » Fri Aug 24, 2007 2:17 pm

The screen is 5.4 inches and I just found out the sound isn't working :( The ground wires to the speakers is undone and I could solder it back easily but I don't have a working soldering iron right now. The screen would be great for a portable but either way It'll be cheaper than it would be other wise.
Kurt_ wrote: I would use tact switches but I want the mushy feel. Mushy = God. (I typed that correctly).
Image

jeroen
Senior Member
Posts: 1573
Joined: Mon Oct 10, 2005 7:42 am
Location: The Netherlands

Post by jeroen » Fri Aug 24, 2007 3:39 pm

sorry sammy don't wanna steal your deal. I'll won't try and get it if you want it. However in case you think it's to big. (and you don't want it) how big is the board? (the actual circuit board)

User avatar
dudex77
Posts: 1499
Joined: Thu Nov 16, 2006 10:43 am
Location: Spain
Contact:

Post by dudex77 » Fri Aug 24, 2007 4:31 pm

jeroen wrote:how big is the board? (the actual circuit board)
About the same size as the screen.
Kurt_ wrote: I would use tact switches but I want the mushy feel. Mushy = God. (I typed that correctly).
Image

jeroen
Senior Member
Posts: 1573
Joined: Mon Oct 10, 2005 7:42 am
Location: The Netherlands

Post by jeroen » Fri Aug 24, 2007 4:32 pm

Sounds good. If sammy doesn't take it we should discuss buisness.

User avatar
schmellyfart
Portablizer Extraordinaire
Posts: 1150
Joined: Sun Mar 05, 2006 8:29 pm
Steam ID: schmellyfart
Location: Gilbert, AZ
Contact:

Post by schmellyfart » Fri Aug 24, 2007 6:30 pm

Do you need a PAL or NTSC one?

specter539
Posts: 111
Joined: Tue Dec 12, 2006 4:45 pm

Post by specter539 » Sat Aug 25, 2007 1:21 pm

Ive got a 5.4" screen for an American version play station 2 slim, which i have added a cord for your own composite video. I used it for an xbox.

sammy
Posts: 568
Joined: Thu Dec 08, 2005 3:13 pm

Post by sammy » Sat Aug 25, 2007 2:21 pm

Yes, forgot to mention that :roll:
It's for a FC twin so I'll guess it'll be ntsc then, right?
Also, it doesn't need to be 5" exactly

specter539: PM'd

User avatar
schmellyfart
Portablizer Extraordinaire
Posts: 1150
Joined: Sun Mar 05, 2006 8:29 pm
Steam ID: schmellyfart
Location: Gilbert, AZ
Contact:

Post by schmellyfart » Sun Aug 26, 2007 12:56 am

PM sent

Post Reply