For sale: SS's DSL lite parts and other ds stuff blowout!

ShockSlayer · Post by **ShockSlayer** » Sun Mar 04, 2007 7:38 pm

Well, I've given up on my dslite.

It's top cartslot broke completely. I desoldered it off. It's flashed with FWNitro.

I'll get pics up tomorrow maybe.

I knida borrowed some of the text from vb's old topic

Top Screen (near perfect condition!) - $20
Bottom Screen (Near perfect it is scratched a bit) - $25
Motherboard flashed with FW Nitro $20
Speakers - $5
Wifi Antenna - $5
Battery - $4

The case is in good condition, includes screws - $20

All buttons - $5

Plastic carrying case : $10

Supercard lite rumble (needs a little soldering work, ribbon cable broke) : $20

Micro sd card 1 gig: $20

---------

Trades: PSOne Screen, GP2x, PSP <-

SS

Jongamer · Post by **Jongamer** » Sun Mar 04, 2007 7:59 pm

So you dont trust dshacker?

he said he would repair it.

But oh well, whatever you want to do

ShockSlayer · Post by **ShockSlayer** » Sun Mar 04, 2007 8:05 pm

Jongamer wrote:So you dont trust dshacker?

he said he would repair it.

But oh well, whatever you want to do

Eh, I dont really need it anymore. I'll try to fix the cart once more, but that will probably be it.

SS

Jongamer · Post by **Jongamer** » Sun Mar 04, 2007 8:07 pm

Whats wrong with it? lift up a trace, or Break a Pin on the Cart connector?

ShockSlayer · Post by **ShockSlayer** » Sun Mar 04, 2007 8:08 pm

The original cartslot had like 3 broken pins. So I tried to install an ar max duo slot into it.

SS

vb_master · Post by **vb_master** » Sun Mar 04, 2007 8:10 pm

Trades for the Supercard lite rumble.

Jongamer · Post by **Jongamer** » Sun Mar 04, 2007 8:12 pm

So there is nothing left to solder to the original cart connector? Cuz you could solder some wire to the broken pins then solder it to the mobo.

Oh and the AR max Duo (Ya I have one too) well Did you unbridge the Pins the Connect to the pins, which are most likely the connections for the EEPROM on the game cart to rip/write saves? this could be the problem if you didnt unbridge them.

ShockSlayer · Post by **ShockSlayer** » Sun Mar 04, 2007 8:14 pm

Well, I desoldered the ds slot from it, to try to replace thedslite one, I think I didnt make good enough connections though.

SS

ShockSlayer · Post by **ShockSlayer** » Sun Mar 04, 2007 8:17 pm

vb_master wrote:Trades for the Supercard lite rumble.

What do you have to offer?

My old wanted list:

PSOne screen
Noacs for built in games
PSP
GP2X
GBASP
FC Twin
Game cube System
LoZ TP Game cube edition
Xbox 360
SNESP
GCp
Wavebird GC controller
snes controller program pad
Original ds
N64 games
Snes Games
Wii stuff

SS

vb_master · Post by **vb_master** » Sun Mar 04, 2007 8:31 pm

Which SNES games.

ShockSlayer · Post by **ShockSlayer** » Sun Mar 04, 2007 8:33 pm

I don't know, my brother wants some.

Do you have a lot, or are they nameable?

SS

ShockSlayer · Post by **ShockSlayer** » Mon Mar 05, 2007 2:09 pm

I like to bump it bump it

SS

Retromaster · Post by **Retromaster** » Mon Mar 05, 2007 6:40 pm

how did the cart slot break? I thought that was almost impossible because those small carts stop at a certain length.

now, was it surface mount, the cart slot?

ShockSlayer · Post by **ShockSlayer** » Mon Mar 05, 2007 6:44 pm

Retromaster wrote:how did the cart slot break? I thought that was almost impossible because those small carts stop at a certain length.

now, was it surface mount, the cart slot?

Some psp fanboi jammed a paperclip in it and pushed it around.

Lets just say he got what he deserved (remember my old psp story? this happened beofre it)

SS

Retromaster · Post by **Retromaster** » Mon Mar 05, 2007 6:48 pm

and you smashed it in a locker?
sounds right.

how did you desolder it? if it was surface mount.
surface mount is hard to desolder.