Error in NES by hand chapter

Hey, making some projects from my book? Got a question about something? Wanna share what you've done? Here's the place - go for it!

Moderator: Moderators

User avatar
soundwave
Senior Member
Posts: 3653
Joined: Wed Feb 23, 2005 1:51 pm
Location: Connecticut
Contact:

Post by soundwave » Wed Mar 09, 2005 5:04 pm

Yeah, make a 2nd edition of the book. Then, after that, you can get to work on Vol. 2, which would, of course, reveal all your secrets on the PS2p, N64p, and the infamous DCp that we know is in the works.

User avatar
jgibson
Posts: 196
Joined: Mon Feb 28, 2005 11:13 am
Location: Hickory, NC

Post by jgibson » Wed Mar 09, 2005 7:12 pm

Since the front of the board was labeled wrong, has anyone checked the next page (page 154 to ensure that the back of the board is labeled correctly?
Life is a lot like a video game without the extra lives and continues.

User avatar
HK-47
Moderator
Posts: 3598
Joined: Thu Jul 15, 2004 2:17 pm
Location: /dev/moderator/
Contact:

Post by HK-47 » Wed Mar 09, 2005 8:59 pm

Yeah, its fine, it was just a labeling error, so it didnt do any damage to the pinout of everything. Just some dork forgetting to add some letters...

User avatar
gamer2
Senior Member
Posts: 3611
Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:

Post by gamer2 » Thu Mar 10, 2005 11:34 am

gamer2 wrote:
HK-47 wrote:This...
Image
im what is that
is this a diagram for the controller?
Image
Image

User avatar
jgibson
Posts: 196
Joined: Mon Feb 28, 2005 11:13 am
Location: Hickory, NC

Post by jgibson » Thu Mar 10, 2005 1:53 pm

Yes, one of them anyway, there are 2 circut boards that must be made in order to rebuild the nes controller. These boards also amplify the video signal as well.
Life is a lot like a video game without the extra lives and continues.

User avatar
gamer2
Senior Member
Posts: 3611
Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:

Post by gamer2 » Thu Mar 10, 2005 3:07 pm

this is all you need for rebuilding the Controller?
Image
Image

User avatar
jgibson
Posts: 196
Joined: Mon Feb 28, 2005 11:13 am
Location: Hickory, NC

Post by jgibson » Thu Mar 10, 2005 3:13 pm

You need 2 circut boards, which you can buy from radio shack, plenty of wire, tact switches, several different rated resistors, 2 capacitors, 2 transisters, the controller's cpu, a sodering iron, a desodering iron, soder, and Ben's book. This is not the only image of how to build the controller. There are 3 more images not shown here, the back on the left board and the front and back of the right board. Building the controller isn't that hard if you follow the instructions. :)
Life is a lot like a video game without the extra lives and continues.

User avatar
gamer2
Senior Member
Posts: 3611
Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:

Post by gamer2 » Thu Mar 10, 2005 3:17 pm

oh ok i have to get the book
Image
Image

User avatar
jgibson
Posts: 196
Joined: Mon Feb 28, 2005 11:13 am
Location: Hickory, NC

Post by jgibson » Thu Mar 10, 2005 3:19 pm

the book makes everything a lot simpler
Life is a lot like a video game without the extra lives and continues.

User avatar
gamer2
Senior Member
Posts: 3611
Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:

Post by gamer2 » Thu Mar 10, 2005 3:28 pm

the thing is i cant get it yet
Image
Image

User avatar
jgibson
Posts: 196
Joined: Mon Feb 28, 2005 11:13 am
Location: Hickory, NC

Post by jgibson » Thu Mar 10, 2005 3:30 pm

gamer2 wrote:the thing is i cant get it yet
That stinks :(
Life is a lot like a video game without the extra lives and continues.

User avatar
gamer2
Senior Member
Posts: 3611
Joined: Tue Jul 27, 2004 12:38 pm
Location: You spam, SANTA Jason gets you!
Contact:

Post by gamer2 » Thu Mar 10, 2005 3:32 pm

jgibson wrote:
gamer2 wrote:the thing is i cant get it yet
That stinks :(
i know
Image
Image

Post Reply