Pg. 129 Table of Parts for Nes?
Moderator:Moderators
-
- Posts:10
- Joined:Tue Dec 13, 2005 11:24 pm
- Location:Caulifornia
Hey fellas, I got a question for who ever knows the answer. When I went into Radio Shack to get the parts I need to build my Nesp. The General Purpose Component PC board looked like it was just a sheet of conductive metal. It was similar to the grid style pc board....but the grid style has holes of course, and the general purpose pc board does not. There was no part number on the package for the G.P.C.P.C.B at radio shack, so did the guy most likely show me the wrong part. He said it was the right part, but that I needed to drill the holes in it. It only said on the package PC board. And also in the book it says that linear regulator cuts off once the voltage going to it drops less than five volts. Does that mean the whole unit will cut off? or just the regulator? Thanx guys
A true friend will stab you in the front
-
- Posts:10
- Joined:Tue Dec 13, 2005 11:24 pm
- Location:Caulifornia
Error with radio shack
Come to find out the employee brought the wrong General Component P.C Board to me, after having that happen again on the second visit with another employee, the third employee I asked finally found it in the back storage room. But whew..I now have all the parts I need except the screen..so back to work for now. Sorry for making the Thread.....but I really was having some problems getting the right part, and the last thing I wanted to do was take any chances when it comes to that. But I still don't know from anyone, if a linear regulator drops out.....will that affect the remaining power running to my uinit when I am done with it.
A true friend will stab you in the front