Search found 103 matches

by Hrduncan
Sat Oct 30, 2010 6:06 pm
Forum: Xbox 360, PlayStation 3, Wii
Topic: DIY xbox 360 Headset.
Replies: 2
Views: 2498

DIY xbox 360 Headset.

alright so since i just acquired an xbox yesterday from bits and pieces ( bought it on ebay rrod) i was playing online and decided that i needed a microphone headset to talk to my friends. i didnt want to blow 20$ on a xbox 360 headset or pay 2$ for a crappy one on ebay. so first i found myself a he...
by Hrduncan
Sat Oct 30, 2010 12:39 pm
Forum: 1990's Gaming
Topic: Which capacitors do I get audio and video from?
Replies: 1
Views: 961

Re: Which capacitors do I get audio and video from?

check ground and maybe try the other side of the cap.
by Hrduncan
Thu Oct 28, 2010 7:50 pm
Forum: 1990's Gaming
Topic: My First Portable - The N65
Replies: 87
Views: 19803

Re: My first portable

get the ptn04050c . it cant take 7v in so you need to run it off the n64s onboard 5v regulator it will supply up to 15v you need to check the data sheet for what resistor you need but you will also need 2 100uf caps. i know 2.2kohm resistor gives you 10.5 v
by Hrduncan
Thu Oct 28, 2010 5:32 pm
Forum: 1990's Gaming
Topic: N64 Controllers
Replies: 9
Views: 3005

Re: N64 Controllers

or you can just chop up a controller mobo without blowing 80$ on a controller.
by Hrduncan
Mon Oct 25, 2010 9:13 pm
Forum: 1990's Gaming
Topic: N64p Worklog
Replies: 94
Views: 23884

Re: N64p Worklog

i like that case a lot!
by Hrduncan
Mon Oct 25, 2010 7:11 pm
Forum: 1990's Gaming
Topic: N64p Worklog
Replies: 94
Views: 23884

Re: N64p Worklog

cut the button holes then cut the button locks out of the controller mount the button locks behind the button holes in the case and it ill work good! plus no bondo.
by Hrduncan
Mon Oct 25, 2010 5:06 pm
Forum: 1990's Gaming
Topic: N64 Paint Job + LED Swap
Replies: 9
Views: 5610

Re: N64 Paint Job + LED Swap

all you have to do is piggyback off the led thats already on the motherboard. use the wide viewing angle ones the look better and youll be able to use less leds.
by Hrduncan
Sun Oct 24, 2010 9:24 pm
Forum: 1990's Gaming
Topic: Official LOB64 Interface Standard
Replies: 154
Views: 109185

Re: Official LOB64 Interface Standard

gamax92 wrote:Hello!!!
What if we put a switch in the master.
The Controller Data Must Go Throught The Switch.
If Slave Not On, Flip The Switch.
What are you trying to say dude?
by Hrduncan
Sun Oct 24, 2010 7:31 pm
Forum: 1990's Gaming
Topic: nintendo 64 power trouble
Replies: 5
Views: 2045

Re: nintendo 64 power trouble

there is a fuse in the ac adapter but it cant be blown from the n64 it can only be blown from the wall.

if you touch ground to 3.3v for example. youll fry the power brick.

but if there is a power surge the power bricks fuse breaks and yaay now you still have a working n64 without a power brick.
by Hrduncan
Sat Oct 23, 2010 8:56 pm
Forum: 1990's Gaming
Topic: My First Portable - The N65
Replies: 87
Views: 19803

Re: My first portable

make sure you wired them in a parallel not a series.
by Hrduncan
Sat Oct 23, 2010 8:55 pm
Forum: 1990's Gaming
Topic: Expansion pack soldering
Replies: 29
Views: 8208

Re: Expansion pack soldering

thats why you can buy two expansion paks remove the 2 mb chips replace them with 4 mb and then use the jumper pak.
by Hrduncan
Sat Oct 23, 2010 10:01 am
Forum: 1990's Gaming
Topic: Expansion pack soldering
Replies: 29
Views: 8208

Re: Expansion pack soldering

the pins are too stiff and when heated can get dislodged from the board and im guessing its easier to work with wires.
by Hrduncan
Thu Oct 21, 2010 9:43 pm
Forum: 1990's Gaming
Topic: N64 wireless?
Replies: 14
Views: 4965

Re: N64 wireless?

cant find one. if you want to make one im sure you could use a av wireless sender and receiver.
by Hrduncan
Thu Oct 21, 2010 9:42 pm
Forum: 1990's Gaming
Topic: Do we have room for another N64P? (t64 WIP)
Replies: 462
Views: 99446

Re: Do we have room for another N64P? (t64 WIP)

this thread is out of hand.
by Hrduncan
Wed Oct 20, 2010 10:54 pm
Forum: Xbox 360, PlayStation 3, Wii
Topic: PS3 turn on problem!
Replies: 3
Views: 1868

Re: PS3 turn on problem!

you need a heat gun a hair blower doesnt get hot enough.