I love that demo of RE!
Great cases!
Search found 23 matches
- Sat Jan 16, 2010 11:19 pm
- Forum: News
- Topic: Scoop! New GAMEBOY ADVANCE the "touch"
- Replies: 13
- Views: 11156
- Thu Jan 14, 2010 2:11 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
It stays at 1 when the 2 handles are together. I get readings from 50 to 200 to 35 from the pins. Some of the pins will stay at 1 when I hit 'em. I'm thinking those are the dead links. I'm on my lunch break now, but I'll mess with this thing more tonite. Any other tips/hints/tricks would be cool, to...
- Thu Jan 14, 2010 2:00 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
Mine has the selection on the dial you're refering to, but it dosent beep I dont have one that makes noise. What's a good and a bad reading look like?Kyo wrote:if it beeps, make sure it's not supposed to (it might be a short that is intended)
- Thu Jan 14, 2010 12:27 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
So basically one point on the mobo and 1 on the cart slot on the corrosponding pin will give me a beep? Thanks again, and sorry these messages are short. Im posting from my iphone, at work.
- Thu Jan 14, 2010 10:41 am
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
Where do i put my pos and ground pins from the multimeter on the cart slot? Thankyou for the pic, also.
- Thu Jan 14, 2010 10:07 am
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
When doing a test with a milimeter where can i ground too?
- Wed Jan 13, 2010 11:57 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
The wise, What does?
- Wed Jan 13, 2010 10:37 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
It's in the right direction. I've re-wired it for the 6th time with some 22 guage wire to see if maybe the thicker wire would be better/easier. All wired up, and still no luck. Here's some pic's http://i50.tinypic.com/2ahzcet.jpg Notice none of the conections are bridged. http://i49.tinypic.com/2q9g...
- Wed Jan 13, 2010 4:28 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
Still no luck any suggestions on making my connecions more accurate?
- Wed Jan 13, 2010 2:08 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
Now when I flip the power switch, the 64 turns on fine without a game. When I put a game in the power supply buzzes and then shuts the 64 off...
- Wed Jan 13, 2010 1:43 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
Nope, the cart slot is the correct direction. But the thing is, is that it's a cart slot from a different 64. I dont think that'd make a difference. Not sure though. 3/4 of the way soldering for the 5th time. Lets see how it'll do.
- Wed Jan 13, 2010 12:59 pm
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
So you're saying you bridged the inner holes with the outter holes and then from those 2 points went to the cart slot?
Sorry I'm just trying to troubleshoot any errors I may have made. I've resoldered this about 4 times already and I'm still stumped.
I have 3 different expansion packs, also.
Sorry I'm just trying to troubleshoot any errors I may have made. I've resoldered this about 4 times already and I'm still stumped.
I have 3 different expansion packs, also.
- Wed Jan 13, 2010 11:36 am
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Re: Is it possible...?
Eagle, isnt the slot originaly put into the inside 2 rows of holes? All of my connections look good, looking at all my solder points with a magnifying glass nothing is touching and everything is soldered. I've tried 3 expansion packs so far letting the N64 "register them" for about 10 seconds each t...
- Wed Jan 13, 2010 2:01 am
- Forum: 1990's Gaming
- Topic: Is it possible...?
- Replies: 33
- Views: 10574
Is it possible...?
That I could have fried my motherboard of my 64 just doing cart relocation? N64 powers on, led comes on, but no image on screen... The AV cables are good tested them with a good 64, also all my soldering looks good. I cant figure out why I cant get an image! :evil: I did nothing to this mobo except ...
- Mon Jan 11, 2010 9:02 am
- Forum: 1990's Gaming
- Topic: cart slot
- Replies: 18
- Views: 6133
Re: cart slot
No problem, now i gotta resolder and retest