...i have started a new thread for all my "hybrid stuff"...

i have the following questions...

can you use the XBOX dvdd for both XBOX and slim PS2...

can you use the same hdd for both...

what 12V battery should i use...

does anyone have any pinouts/motherboard dimensions...



sorry

edit: how boit you try putting all your 100's of semi dumb questions is one thread yuor starting maybe a few to meny

if you mean me read above...

i forgot analog compatability...

once again,

sorry

no

yes but you would have to reformat it each time you switch systems so not realy (no partioning the drive with differint formats would not work)

one with lots of amp hours

witch pinouts would you like?

thank you

XBOX dvdd
slimPS2 dvdd
XBOX usb hdd
PS2 usb hdd
analog
conroller
XBOX psu

for the a shared dvd drive, you might (this is a guess) be able to share the same dvd laser spindle device and connect it to the separate DVD drive mobos for the XBOX and PS2. i would just use 2 different drives though

for a battery, get a high capacity battery or run 2 series of 8 D size batteries in parrallel

Xbox dvd is ide/atapi, so it's standard.
ps2 has integrated dvd controller so there is no pinout for it
USB is a standard connector and has a standard pinout
Xbox psu uses a custom adaptation of an atx contector that differs depending on what model you use.
http://pinouts.ru

1.1 or 1.6

THANKS

the ps2 tend to be picky about witch lazer is likes and both devises have to be able to send the correct calls to the drive

the only way to do it realy is to bulid a devise witch would take the ps2s calls and convert them to the calls a ide dvd drive uses wile doing the same from ide drive to ps2 witch would involve (among outher things) the use of a FPGA and a great deal of programing skill and engineering knowhow

my dad's a programmer well versed in C++ and java and much more...

i have a chip in mind , a Basic Stamp Revision-D...

i know this sounds dumb, but when putting an avatar on you post...how do you do the URL

edit:^ look under Profile on the top of the screen

if your dad dose have the skills/the time and effort to pull that off I would vey much like to have his source code/ scematics when he is finished

thanks pep

but HOW i'm running out of time on the pc

refer to the "how to post images" thread in Forum 42, but instead of putting the url in between "[img]" tags, paste it into the "link from off-site url" box in the profile editor.

thanks

<-

make it smaller

is there any way to "shrink" a slim PS2 or XBOX mb like ben did with the atari 2600