Heatsinks: How to make them disperse heat better!

Moderator:Moderators

Post Reply
User avatar
HotDog-Cart
Portablizer
Posts:3804
Joined:Sat Jul 16, 2005 12:07 pm
PSN Username:Lythinca
Steam ID:scythe_king
Location:Your IP Address, Connecting...
Contact:
Heatsinks: How to make them disperse heat better!

Post by HotDog-Cart » Sat Aug 01, 2009 8:03 pm

Hey guys. This is a trick, which I've learned from a certified electrician (and the owner of a computer repair store.)

If you look at any big speakers, you will notice most have a heatsink that is external. (On the back of the unit.)

Don't touch the heatsink, want to know why? Any good pair of speakers will have a SHARP heatsink. (Aka: Its sharp because its roughed up. Not sanded smooth.) Want to know why? Simple.

A roughed up heatsink that is not sanded smooth, will disperse heat better. Don't ask me how, but I've been told this by a lot of people.

Now, how do you make your silky smooth heatsink, into a rough and tough bad boy? Well...

Try sanding it with heavy grit/heavy coarse sandpaper. Rough it up. Make it so it isnt pretty, and so it will look like it has slivers. (Or you could somehow grind/dremel it.)


There ya go!
-HDC
Image

User avatar
bicostp
Moderator
Posts:10491
Joined:Mon Mar 07, 2005 5:47 pm
Steam ID:bicostp
Location:Spamalot
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by bicostp » Sat Aug 01, 2009 8:14 pm

Yep. Rough heatsinks have more surface area. More surface area = more heat dissipation.

The only part you don't want to scour is the side that contacts the heat source. You actually want that to be as smooth as possible, for the best possible heat transfer.

User avatar
HotDog-Cart
Portablizer
Posts:3804
Joined:Sat Jul 16, 2005 12:07 pm
PSN Username:Lythinca
Steam ID:scythe_king
Location:Your IP Address, Connecting...
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by HotDog-Cart » Sat Aug 01, 2009 9:14 pm

Yes, so do not rough up the bottom. Rough up the top and sides.
Image

User avatar
collinE
Posts:891
Joined:Thu Aug 07, 2008 9:07 am
Location:Salt Lake City, Utah
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by collinE » Sun Aug 02, 2009 12:18 am

Well that's interesting. That may have been common sense to some, but I never thought about doing that.
It takes a big man to cry, but it takes a bigger man to laugh at that man.

Ridonkulous

User avatar
snowpenguin
Posts:1306
Joined:Thu Jun 11, 2009 4:10 pm

Re: Heatsinks: How to make them disperse heat better!

Post by snowpenguin » Sat Aug 08, 2009 1:34 am

Hate to bump a dying thread, but as Palmer has said on MR, sanding heatsinks doesn't get you far. What little surface area sanding does add, is shadowed by the fact that it is harder for air to move over a rough surface. Heatsink + No air flow = Right back where you were.
Image

User avatar
palmertech
Senior Member
Posts:3225
Joined:Sat Feb 02, 2008 1:40 am
Location:California, land of the homeless and hippies
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by palmertech » Sun Aug 09, 2009 1:25 pm

To summarize my critique:

This is useful for heatsinks without a fan. If you have a fan, you are better off having a smooth heatsink, there is a reason PCs are made with smooth heatsinks.

In addition, the surface area you are adding is minuscule at best. A far better way would be to take a dremel and make a lot of thin, shallow cuts in the surface.
Image

Excellent

User avatar
HotDog-Cart
Portablizer
Posts:3804
Joined:Sat Jul 16, 2005 12:07 pm
PSN Username:Lythinca
Steam ID:scythe_king
Location:Your IP Address, Connecting...
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by HotDog-Cart » Mon Aug 10, 2009 2:05 pm

Whos willing to put some hardware on the line and test this?
Image

User avatar
palmertech
Senior Member
Posts:3225
Joined:Sat Feb 02, 2008 1:40 am
Location:California, land of the homeless and hippies
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by palmertech » Mon Aug 10, 2009 2:07 pm

How would you test it? We are looking at a MAYBE 5% difference either way.

Like I have said before, bad for heatsinks with fans, and thought not the best solution, good for ones without airflow over them.
Image

Excellent

User avatar
eurddrue
Senior Member
Posts:2367
Joined:Fri Jul 18, 2008 1:26 pm
Location:I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch
Contact:

Re: Heatsinks: How to make them disperse heat better!

Post by eurddrue » Mon Aug 10, 2009 2:22 pm

HotDog-Cart wrote:Whos willing to put some hardware on the line and test this?
I sanded my heatsink on my n64 portable, I couldn't tell the difference, but it may have helped. :)
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe
I think we should check to see if you can withstand 220 volts

Post Reply