Gamecube portable project worklog.

Nintendott · **Posted:** Thu Jun 04, 2009 2:03 pm

Link here if you want to see the beginning of this project.

I Have :

Cube.NTSC
PSone screen PAL
+6 Controllers
8V Regulator
Xeno modchip
220 uf capacitor 16 v
Case
Battery in the mail soon.

I Need:

Metalic paint. (Ultra shiny silver cromeish)
Higer Brain capacity

viewtopic.php?f=7&t=31200.

http://img145.imageshack.us/img145/8271/cimg1532.jpg

Thats it for now.

Lets update.

I glued the regulator board to the heatsink to save space and mess.
I had to cut down some of the cooling pins to make it fit, but i`m pretty
happy with the results.

Pictures below

UPDATE!

I added 4 LED`s in to the fan to make it more "fancy"
Not much.

What can i say?

A new gamecube, a new chanse

(First one died)

:lol:

i want it to look like this.

i soldered the Disk Drive drive here.

Zeturi · **Posted:** Thu Jun 04, 2009 3:08 pm

Nice work, also working on a GCp. Rewiring the DD pcb is really annoying, huh?

Not to be nit-picky, but could you please reduce the resolution of your pics? Most of us don't have super uber monitors (like me, with 1024 x 600). Another alternative is imageshack, so you can show a clickable thumbnail that can take you to the image's larger version.

Nintendott · **Posted:** Fri Jun 05, 2009 6:31 am

Hey again, yes i can do that, i dind`t know the picture was THAT big :lol:

.

Nintendott · **Posted:** Sat Jun 06, 2009 4:00 pm

UPDATED!

1. Message.

Zeturi · **Posted:** Sat Jun 06, 2009 4:46 pm

Where'd you plan to put the dvd drive? Also wondering, how hot does you cube get?

Nintendott · **Posted:** Sun Jun 07, 2009 2:01 am

I put my finger on the processor and the ATI processor.
The ATI processor gets fast hot.(ATI Processor is the on i put the fan over.) The other Processors (the big one and the 2 others next to it), didn`t get hot.
Just bout the same heat as my ear. EAR? :lol:

Try puting your finger on your ear and you can feel what i mean.

I will put my DD on the back of the system. I found a realy perfect case at polycase.com.
Do you have anny pictures of your project? :shock:

Zeturi · **Posted:** Sun Jun 07, 2009 10:38 am

The only pictures I have up are already posted in my worklog, a few topics down. I'm probably going to keep the current heatsink, and have one fan push the air out, and the other with pull hot air out of the system.

As for my casing, I'm hoping to make a vac-forming table, but... I might frankencase, depending on my income.

Nintendott · **Posted:** Sun Jun 07, 2009 10:45 am

i do not know what a frankincase is. :shock:

Zeturi · **Posted:** Sun Jun 07, 2009 10:50 am

Frankencasing is when you take old cases from used electronics, melt and bondo them together, then sand them down to make a new case.

Nintendott · **Posted:** Sun Jun 07, 2009 11:16 am

OK, thanks!

Basement_Modder · **Posted:** Sun Jun 07, 2009 12:54 pm

The darth 64 is an excellent frankencase:

Zeturi · **Posted:** Sun Jun 07, 2009 1:52 pm

Basement_Modder wrote:

The darth 64 is an excellent frankencase:

Indeed it is!

Nintendott · **Posted:** Sun Jun 07, 2009 2:32 pm

Ho! yes, i have seen his video.
He is super pro!

Nintendott · **Posted:** Sun Jun 07, 2009 2:37 pm

UPDATE!

1.message

PAGE 2 IS HERE NOW.

kasar · **Posted:** Tue Jun 09, 2009 8:17 am

Loving the led mod

are u planning to use a transparent casing for fan leds?

Gamecube portable project worklog.

Who is online