Tritons GCP Saga HOLY CRAP UPDATE 01/28/09!
Moderator:Moderators
- Metroid fan
- Senior Member
- Posts:2158
- Joined:Fri Apr 15, 2005 2:36 pm
- Location:Somewhere in the universe
- Contact:
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
yea i am well aware of the lack of bondo, was a bit of a rush job to get it done for MGC, didnt quite make it but i basically built this thing in just over 2 weeks!
Visit us at Portablesofdoom.org
- Metroid fan
- Senior Member
- Posts:2158
- Joined:Fri Apr 15, 2005 2:36 pm
- Location:Somewhere in the universe
- Contact:
- Turbo Tax 1.0
- Portablizer Extraordinaire
- Posts:4773
- Joined:Wed Mar 30, 2005 6:19 pm
- Location:Delaware, no sales tax
- Contact:
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
It will be silver because krylon metallic is an almost perfect match for the silver nintendo used on the silver cubes! i doubht i will bondo on the handle itsself but the gaping holes in the case will be filled and all my crappy bondowork will be improved, because like i said it was a really rushed job, i did what little bondo is on there in like a couple hours lol
Visit us at Portablesofdoom.org
- XPCportables
- Posts:1020
- Joined:Mon Aug 08, 2005 3:27 pm
- Location:The end of time...
-
- Senior Member
- Posts:1911
- Joined:Tue Mar 29, 2005 12:39 pm
- PSN Username:Denki_no_Ame
- Location:What's it to you? Stalker...
- Contact:
Dude... you make me SICK with your 1337 80n|}0 5K1LL5! That mend between the controller halfs and the console casing... *shakes head* just wow man... I gotta say, I've never been one for frankencasing, but you really seem to be able to make them as aesthetically pleasing as possible. But, NOTHING'S gonna beat the gloss black top and brushed aluminum sides of my GC laptop! MWAHAHAHAHAHA!!! Seriously though... my case probably won't end up turning out as well as I hope it will... good job on yours so far. I'm sure you have some finishing touches to make on it as well. Keep us posted and keep the pictures comin'! Just promise me you'll buy a CF DD replacement add-on board from me once we get that project finished (where are you, R3ason!?), and build another GCp with it. Just think about it... you'll be able to make your case probably 1" thick if you take out the disk drive and use CF cards!
-
- Senior Member
- Posts:1911
- Joined:Tue Mar 29, 2005 12:39 pm
- PSN Username:Denki_no_Ame
- Location:What's it to you? Stalker...
- Contact:
Oh, we'll need to do this for our Gamecube HDD project, won't we? Or we could just downlo... hmm... okay wait... I don't want to get in trouble here, but if you already own the game, is there something wrong with torrenting the ISO?
Ah, anyway, what's this about loading the DOL onto your GC? Do you load the DOL onto a memory card and boot it off that... or... what? Would this mean you'd need a modchip, a memory card... loader... thingy (I don't know what they're called! Leave me alone!), AND a BBA? That's a lot of gear. I'm not really "with it" as much as I should be when it comes to GC modchips 'n stuff. >.>
Ah, anyway, what's this about loading the DOL onto your GC? Do you load the DOL onto a memory card and boot it off that... or... what? Would this mean you'd need a modchip, a memory card... loader... thingy (I don't know what they're called! Leave me alone!), AND a BBA? That's a lot of gear. I'm not really "with it" as much as I should be when it comes to GC modchips 'n stuff. >.>
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
HOLY MOTHER OF GOD!.... an update! got most of my power circuit built, still nothing for audio but i have tested my voltage reg for 1.9v and it put out what i expected (1.94 with no load,should be fine), not sure about my 3.3v reg but thats not a big issue, i might actually get it all up and running soonish!
Visit us at Portablesofdoom.org
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
:O holy crap!Triton wrote:HOLY MOTHER OF GOD!.... an update! got most of my power circuit built, still nothing for audio but i have tested my voltage reg for 1.9v and it put out what i expected (1.94 with no load,should be fine), not sure about my 3.3v reg but thats not a big issue, i might actually get it all up and running soonish!
How much would you charge for a full working unit?
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
i would charge somewhere around $500+ if i had to supply all parts, with the buyer supplying the cost would go down some
Visit us at Portablesofdoom.org
- Triton
- Moderator
- Posts:7397
- Joined:Mon May 24, 2004 12:33 pm
- 360 GamerTag:triton199
- Steam ID:triton199
- Location:Iowa
- Contact:
Re: Tritons GCP Saga (formerly build log/progress reports)
HOLY CRAP BUMP FROM BEYOND THE GRAVE! i decided to de-uglify the GCP and get it finished for MGC 09! considering i didnt get done in time for mgc 08 OR 07 i got fingers crossed this time around heres an updated pic!
Visit us at Portablesofdoom.org
- ShockSlayer
- Niblet 64
- Posts:5059
- Joined:Thu Jun 29, 2006 12:47 pm
- Location:In my inbox.
Re: Tritons GCP Saga HOLY CRAP UPDATE 01/28/09!
HOLY CRAP I POSTED HERE 2 YEARS AGO!
Wow, I actually wanted to buy one? I've alrady made one!
Anyways, nice to see your going to try. again.
SS
Wow, I actually wanted to buy one? I've alrady made one!
Anyways, nice to see your going to try. again.
SS
http://twitter.com/ShockSlayer" onclick="window.open(this.href);return false;