* Login 
* FAQ    * Search

All times are UTC - 6 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Haunted360 - PSone LCD Screen Controller Board Light Issue
PostPosted: Sat Sep 25, 2010 10:48 pm 
Offline

Joined: Sat Jan 30, 2010 12:22 am
Posts: 1000
Location: Australia
Hey, I have a 3rd party PSone TFT LCD Screen that I LED Modded.


Now, the LED's are working fine and they are at a current of 3.0 Volts.


The issue is, that the controller board is setting its own white balance I believe. So when the power is unplugged, it is very bright. However, when I plug the screen in with the controller board, it goes very very dim.


Is there a component I can de-solder and upgrade?

I doubt going through RGB will fix it... Correct me if I am wrong!

I reckon it is actually in (programmed) the IC chip somewhere on the board, because it does have contrast control - VIA up / down to increase / decrease it, but it is very stupid of them to do this I think...


Any ideas?


Thanks


Top
 Profile E-mail  
 
 Post subject: Re: Haunted360 - PSone LCD Screen Controller Board Light Issue
PostPosted: Mon Sep 27, 2010 7:41 am 
Offline
Portablizer
User avatar

Joined: Mon Dec 08, 2008 6:14 am
Posts: 1113
Location: Australia
ooo i remember theres a component you can bridge to fix that
Quote:
Ben's Official Way to Improve PSOne Backlight Mod

By Ben Heckendorn
Hey guys, this is Ben Heckendorn, you know, the runner of the site who occasionally pops up so you know I'm not dead. Anyway, while working on my next ALL-NEW portable system, I made a discovery regarding the PSOne screen!
Long ago I did a LED backlight mod to my screen and I know quite a few of you have adapted it. While it DOES work and lowers the power usage by a lot, it's not very bright.

WELL, NOW THAT HAS CHANGED!

Strictly by accident, while holding the PCB of the screen, I noticed by putting your fingers on certain places it changed the image. The horizontal position, the colors. If I licked my finger and touch the middle of the board, the whole image got way brighter (as you can see, I'm incredibly scientific) I narrowed it down to ONE surface-mount component. I placed the JPG on my website, use this link to find it: [acually, it's right here. -abbibi]

Image

_________________
Australian Kaillera server
hhttp://i56.tinypic.com/ncb0wi.gif


Top
 Profile  
 
 Post subject: Re: Haunted360 - PSone LCD Screen Controller Board Light Issue
PostPosted: Mon Sep 27, 2010 8:00 am 
Offline

Joined: Sat Jan 30, 2010 12:22 am
Posts: 1000
Location: Australia
THANK YOU!

You saved the Pn64 (well, Ben Heck did) and it's Development is back.

It didn't make it that much brighter...

... But it was better than it was. So thanks!


Top
 Profile E-mail  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group