Been playing around with portable DVD players recently and i found the 2nd monitor add-on from a venturer car dvd player. Picked it up at value village for ~$5. Firstly i plugged it in to make sure it was working fine, then added composite input from my PSone, it worked fine, despite the terrible composite picture.
Tonight i disassembled the unit and found that the whole LCD Module is nicely compacted from the whole unit on a single ~4"x3" PCB nicely mounted to the backside of the LCD. It is a 16:9 switch-able LCD Module, so its not the prised pick i wish it was, but its a nbice screen none-the-less. Not entirely sure on the internal resolution as of yet though.
Back to the main topic. While studying the PCB I noticed a small "Sharp IR3Y29B" chip and looked up the datasheet. Pleasurable results yielded RGB inputs among other delights, Nicely illustrated and labelled in the diagram attached.
What do you people think about this screen?
Should I continue the modification?
EDIT: pictures of the screen are here, and the LCD module is ONLY lcd+black bored it is about .5" thick when taken from the rest of the unit.http://www.propertyroom.com/l/l/7784277