A few scans of the wired GC controller.
Top of the PCB, all thru hole components removed
Top side with components removed and traces exposed. 50/50 composite from top side clean scan, so all traces can be seen, but also what their reference designations were.
Bottom side the same
GC Controller (Wired) PCB Scans, DOL-003
Moderator:Moderators
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Re-mappable Wireless 360 Controller - The CGnome
Re-mappable Wireless 360 Controller - The CGnome