Gamecube video mods+GC info

ShockSlayer · **Posted:** Sat Jan 10, 2009 11:21 pm

Kyo wrote:

Some yes, it connects the poles of the battery with a resistor, but it's probably insignificant.

Anyway, I think this would be better suited for technical information, as this is generally helpful.

Mario took care of that. I linked to it in my post.

SS

XPCportables · **Posted:** Sun Jan 18, 2009 9:56 pm

footinmouth wrote:

what is the ma draw from the gamecube? the link is dead

yeah I need to know that too since I'm regulator shopping.
EDIT: Never mind it's just an outdated link here is the original post with fixed links.

Gamelver wrote:

As is turns out, the Gamecube can in fact output an RGB signal, perfect for our favorite portablizing screen

(the psone screen)!!!! Also, you can get VGA from the GC if you want

.

First of all, you're gonna need a component cable for the GC. Here's a place where you can get one

.

Once you've got your component cable, then open it up and start modding!!!!...according to these guides, of course

...
SNES/N64/GC pinout (please note that the RGB doesn't work on the GC, either)
S/PDIF mod
RGB/VGA mod
more on RGB mod (fourth post down)
how to get c-sync out of composite

usbcd36 wrote:

Here is a connection diagram:

Connect wires along all the black lines, do not connect any intersections. Connect wires along the white lines as well, and tie all grounds together somewhere.

thanks usbcd36 for originally posting these

!!

oh yeah, and when I have time, I'll probably add some video mods for the PS2/XBOX, too

...right now, I've got more homework :roll:

...

also, I'll add all I know about the GC

....

Edit: I'm gonna put up the thread with all my "useful" GCp posts...enjoy

!

GCp info
GC mA measurements!
NOTE: the gamecube does NOT require 12v on the 12v line, according to shockslayer it will work with as little as 5v!

EDIT: Does anyone know if the 1.9v line can run on 1.8v I can't seem to find a good 1.9v dc-dc converter.

DaStan · **Posted:** Tue Feb 10, 2009 9:38 pm

Hey, me again.
I found a tear down down on the Gamecube which includes pin outs for various ports. It may come in handy to someone, so here it is.
http://hitmen.c02.at/files/yagcd/yagcd/chap2.html

XPCportables wrote:

Does anyone know if the 1.9v line can run on 1.8v I can't seem to find a good 1.9v dc-dc converter.

I'm betting that 1.8v would work fine on it, the link I just posted even list some of the PSU outputs as 1.8v instead of 1.9v.

Quote:

pin Signal
1 Ground
2 Ground
3 3.3V
4 3.3V
5 Ground
6 Ground
7 Ground
8 Ground
9 1.8V
10 1.8V
11 1.8V
12 1.8V
13 1.55V
14 1.55V
15 1.55V
16 Ground
17 Ground
18 Ground
19 Thermo detect
20 12V
21 5V
22 5V

jesus · **Joined:** Sun May 10, 2009 9:01 pm **Posts:** 1

:

?: I have a battery charger of DC 7.4V 3800mAh can works in my gamecube

sorry for my bad english

kasar · **Posted:** Sat Jun 20, 2009 7:14 pm

jesus wrote:

:

?: I have a battery charger of DC 7.4V 3800mAh can works in my gamecube

a 7,4v battery charger?

well, it may work with custom regulators

-----------------------------

if with "a battery charger" you mean "battery":

the battery seems ok , but not sure about the 12v line of the gamecube, if you use less than 12v, like that battery, you probably will need to use custom regulators and suply 5v to the 12v line, I didnt tested this by myself, btw other members said it worked for them, so its your choice.

also,dont espect play 2 hours or more with that battery, the gamecube is power hungry, and ofc if you are worried about the power consumition, the screen of your choice, will be an important decision.

Quote:

sorry for my bad english

dont worry , mine sucks too

sometimes I was wondering if people can get a word from my GCp guide, or the entire guide sounds like chinese xD

Zeturi · **Posted:** Sun Jun 28, 2009 9:13 am

kasar wrote:

sometimes I was wondering if people can get a word from my GCp guide, or the entire guide sounds like chinese xD

Naw, your guide is awesome!

kasar · **Posted:** Sun Jun 28, 2009 9:47 am

Zeturi wrote:

Naw, your guide is awesome!

ty

palmertech · **Posted:** Fri Jan 08, 2010 1:38 am

ULTIMATE BUMP!

Most of the links are dead, are there any mirrors for how to get RGB out of an NTSC GC?

carbsdog · **Joined:** Mon Apr 18, 2011 5:09 am **Posts:** 13

picture link is borked

Gamecube video mods+GC info

Who is online