blue_stalfos's GCP worklog
Moderator:Moderators
- griehm
- Posts:145
- Joined:Mon Jun 07, 2010 8:16 pm
- PSN Username:hotchik3nflings
- Steam ID:invisiblejack22
- Location:Vancouver BC CANADA
Sorry I didn't ask earlier but what did you use to mould the case?
Setting up a website- I need input!
If you've got time- PM me for link.
If you've got time- PM me for link.
- cubic_pixel
- Posts:17
- Joined:Tue Feb 08, 2011 7:07 pm
- PSN Username:tootsie123
- 360 GamerTag:blue_stalfos
- Contact:
Re: blue_stalfos's GCP worklog
No problem . I used loctite spot putty to mold around areas, fill in gaps (like the gaps with the L and R triggers), and to fill in low spots. I also used loctite epoxy on the inside of the case to hold the buttons in place.
My name is blue_stalfos on MR and MBB
- griehm
- Posts:145
- Joined:Mon Jun 07, 2010 8:16 pm
- PSN Username:hotchik3nflings
- Steam ID:invisiblejack22
- Location:Vancouver BC CANADA
Re: blue_stalfos's GCP worklog
Awesome. I've been looking for something exactly like that for projects. Looks like it's really great to work with.
Does it dry and sand like bondo, just less goopy?
Does it dry and sand like bondo, just less goopy?
Setting up a website- I need input!
If you've got time- PM me for link.
If you've got time- PM me for link.
- cubic_pixel
- Posts:17
- Joined:Tue Feb 08, 2011 7:07 pm
- PSN Username:tootsie123
- 360 GamerTag:blue_stalfos
- Contact:
Re: blue_stalfos's GCP worklog
SUCCESS
Forgot to ground external 3.3v supply
When I finally got to the WiiKey menu, It says the following:
1. error WBFS
2. WBFS: Get header error
3. Mounting...
>>>FUSION CONFIGURATOR>>>
It also sometimes says the card is not in WBFS format. I've tried this about 10 times with different SD cards and end up geting the
same result.
>I've never worked with bondo before, but the putty was really easy to sand and dries within a day.
Forgot to ground external 3.3v supply
When I finally got to the WiiKey menu, It says the following:
1. error WBFS
2. WBFS: Get header error
3. Mounting...
>>>FUSION CONFIGURATOR>>>
It also sometimes says the card is not in WBFS format. I've tried this about 10 times with different SD cards and end up geting the
same result.
>I've never worked with bondo before, but the putty was really easy to sand and dries within a day.
My name is blue_stalfos on MR and MBB
- griehm
- Posts:145
- Joined:Mon Jun 07, 2010 8:16 pm
- PSN Username:hotchik3nflings
- Steam ID:invisiblejack22
- Location:Vancouver BC CANADA
Re: blue_stalfos's GCP worklog
Bondo is... tough. It's more a liquid, so it's harder to sculpt with.
Setting up a website- I need input!
If you've got time- PM me for link.
If you've got time- PM me for link.
- cubic_pixel
- Posts:17
- Joined:Tue Feb 08, 2011 7:07 pm
- PSN Username:tootsie123
- 360 GamerTag:blue_stalfos
- Contact:
Re: blue_stalfos's GCP worklog
After much troubleshooting with Ashen I still couldn't get it to work, so He offered to do it for me
Until I get it back (sometime by the beginning of next week) i'm going to try and finish everything else up. All I have left to do is drill fan holes, hook up the regulators, trim a heat-sink and wire up video/audio ect.
I wired up the controls today.
PICS:
Until I get it back (sometime by the beginning of next week) i'm going to try and finish everything else up. All I have left to do is drill fan holes, hook up the regulators, trim a heat-sink and wire up video/audio ect.
I wired up the controls today.
PICS:
My name is blue_stalfos on MR and MBB
- cubic_pixel
- Posts:17
- Joined:Tue Feb 08, 2011 7:07 pm
- PSN Username:tootsie123
- 360 GamerTag:blue_stalfos
- Contact:
Re: blue_stalfos's GCP worklog
I got my board from Ashen today :awesome: and it is the most beautiful thing I have ever seen. He did an amazing job on it. (I'll take pics later)
My PTR08060 (1.9v) is outputting 0.58v no mater what resistance I hook up to it and even if there is no resistance.
My PTR08060 (1.9v) is outputting 0.58v no mater what resistance I hook up to it and even if there is no resistance.
My name is blue_stalfos on MR and MBB
- iphone_addict
- Posts:46
- Joined:Wed Feb 01, 2012 4:25 pm
Re: blue_stalfos's GCP worklog
any more news on gcp?
- cubic_pixel
- Posts:17
- Joined:Tue Feb 08, 2011 7:07 pm
- PSN Username:tootsie123
- 360 GamerTag:blue_stalfos
- Contact:
Re: blue_stalfos's GCP worklog
Trimmed and Mounted the heat sink
Made a holder out of plexiglass to hold in the batteries in place.
Made a holder out of plexiglass to hold in the batteries in place.
My name is blue_stalfos on MR and MBB