These are my diagrams for GC memorycard rewiring and for wiring up an SD Gecko. They go along well with my motherboard trimming guide. Thought they might prove useful to some.
GC Memorycard pinout & notes:
Pin #'s shown coincide with the pin #'s printed on top of the GC motherboard.
SD Gecko pinout & signal's:
Pin #'s shown are SD card pin #'s. When wiring to GC match up signals only! INT signal is only needed on pin 9 IF you plan to make up a microSD to GC adapter as shown below. If you don't care about this feature, then the INT signal is not needed for SD Gecko operation.
GameCube motherboard pinouts & signals:
Slot A - TOP of motherboard:
Slot A - BOTTOM of motherboard - Relocation points also shown:
Slot B - TOP of motherboard:
SD Gecko (micro SD card adapter) to GC memory card slot signal's:
Again the pin #'s shown here are SD Card pin #'s. Match up the signals shown to a GC memcard slot to make up a handy adapter if you have internalized the SD Gecko slot on your portable.
GameCube Memory Card & SD Gecko Diagrams
Moderator:Moderators
- uesleiporto
- Posts:21
- Joined:Mon Jul 04, 2011 12:36 am
Re: GameCube Memory Card & SD Gecko Diagrams
Thanks Ashen
it helps a lot
it helps a lot
Re: GameCube Memory Card & SD Gecko Diagrams
Wait, so you're saying if I wire up an SD card correctly, I can use it as a GC memory card?
Re: GameCube Memory Card & SD Gecko Diagrams
No, it can't be used as a regular GC memory card. You can use it to load homebrew, emulators, etc.
- uesleiporto
- Posts:21
- Joined:Mon Jul 04, 2011 12:36 am
Re: GameCube Memory Card & SD Gecko Diagrams
putting an sd gecko, you have some idea as to the sense of the slot b? How do I put the sense in sd adapter?
or is it just to make a permanent connection?
or is it just to make a permanent connection?
Re: GameCube Memory Card & SD Gecko Diagrams
I usually just wire 3.3v to pin 1 of slot B. The GC will think something is always inserted though, which really is no big deal.
Most SD slots do have extra pins for the sense line though. So if you wanted to wire them up you could.
Most SD slots do have extra pins for the sense line though. So if you wanted to wire them up you could.
Re: GameCube Memory Card & SD Gecko Diagrams
any pics on one wired allready?
Would be cool, just for an ultimate check. awesome job tough, really helped me.
Would be cool, just for an ultimate check. awesome job tough, really helped me.