Gc controller
Moderator:Moderators
-
- Posts:24
- Joined:Fri Oct 22, 2010 9:24 pm
- 360 GamerTag:Jake0830
- Location:AZ
I was soldering all the points for the joystick and I got them all in but two of them fell out with the traces. I have been trying to find where to connect them for an hour but had no luck. So could anyone post or send me to a guide of where exactly eveything for the joystick connects. Also it makes it go up randomly and constantly on the game when up and down don't work for the stick??
-
- Posts:24
- Joined:Fri Oct 22, 2010 9:24 pm
- 360 GamerTag:Jake0830
- Location:AZ
Re: Gc controller
Alright cool this is a great diagram thanks. I can't get the joystick working though but I'll end up buying a new controller but thanks again!
-
- Posts:24
- Joined:Fri Oct 22, 2010 9:24 pm
- 360 GamerTag:Jake0830
- Location:AZ
Re: Gc controller
Ok I'm stuck I wired the left trigger slider thing and the button for it and they are not working. I soldered them to the same holes to and everything else works. What am I doing wrong??
-
- Posts:24
- Joined:Fri Oct 22, 2010 9:24 pm
- 360 GamerTag:Jake0830
- Location:AZ
Re: Gc controller
Maybe not the slider, but the button part has both wires connected and it doesn't work. Unless it only works along with the slider thing?
-
- Posts:24
- Joined:Fri Oct 22, 2010 9:24 pm
- 360 GamerTag:Jake0830
- Location:AZ
Re: Gc controller
Ok I grounded the slider and I works and the game I'm testing doesn't use the button part. The ground always confuses meneven though it's so easy and I got the joystick working finally cuz I grounded it haha. But thank you again soon my portable will be about 50 - 60% done!
-
- Posts:24
- Joined:Fri Oct 22, 2010 9:24 pm
- 360 GamerTag:Jake0830
- Location:AZ
Re: Gc controller
Alright I have everything hooked up on my controller and working properly.