Could you upload some photos? Please?

Other questions:

Did anyone ever compare the output of the 'easy' RGB mods vs the one that's needed for most PAL systems?

Are the cases all interchangeable? (There was some talk about cases and pcbs being mixed up) I just thought that they may have altered the plastic cases too when altering the pcb layout.

Thanks!

Hi, i tried soldering 2 cables to Y and C and they are outputting s-video. Do that means that a good gamecube s-video cable will work fine?



I could not find this model in the revisions database, Brazilian Pal normal black. More pics of it:
http://www.mediafire.com/?50jdn7zq48srf3x

Model: NUSM-001(BRA)


*edit 3: There are 2 places for stickers in the bottom, if it had another sticker with the serial, it's gone. There is only one, almost unreadable and it has the same PNxxxxx number of the other one in the bottom of the motherboard.

Hey I thought I'd add my system to the list, these posts have been very helpful in modding mine for rgb. I used the one located at http://www.mmmonkey.co.uk/console/ninte ... gb_new.htm and everything looks great when hooked up to my lcd monitor through the xrgb mini.

NTSC (black case)
NS117749519 - NUS-CPU-03

to Prof Hufnagel For me the N64 pal rgb mod works very, whitout a ampli. I cannot say the same whit the easy ntsc one. it is very dark i havo to built a ampli.
I will try the same mod in a not easy moddable Ntsc. But I think that it will work...

Serial of my n64, it is Ntsc-U...
NS 182828706
NUS-CPU-04
black case

another jap

NUJ 12248430
NUS-CPU-04
black case

USA NTSC N64 (Basic Grey console - part of Toys R Us Gold Controller bundle)
NUS-CPU-04
NS170250793