SnesP WIP Codename DsneS *suggestions and help appreciated*
Moderator:Moderators
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Hey there evryone I am reviving my thread because I am also reviving my portable attempt so lets see what happens of it
Last edited by overlordlink on Sat Oct 23, 2010 12:25 am, edited 4 times in total.
You Have Been Warned!!!
Spoiler:
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
Oops.
overlordlink wrote:alright well i was kinda deabating whether or not to finish my SnesP, Or to slightly romance something that existed to met my needs but it appears as if im gonna stick with the SnesP. At least for now lol
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
umm its a 7 inch lcd out of a portable dvd player and i think i requires 5 volts to run not sure gotta check it with my multimeter later
You Have Been Warned!!!
Spoiler:
Re: I need help with my SnesP
yeh. but does your screen have composite video input??
you can use the batteries though
you can use the batteries though
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
umm no its out of an old dvd player I had why woud it be a problem if it didnt? like the dvd player had video output but im thinking of actually getting a ps1 scren from a friend would that be easier? if so i will definatly do it
You Have Been Warned!!!
Spoiler:
Re: I need help with my SnesP
First, you are going to need to drop the voltage to about a third of what those batteries are outputting if you are planning on using them. Second, if there is no composite input anywhere on the board there is no way you are going to get video to it. Third, not trying to be mean or anything, but your grammar sucks. It took me a couple minutes to decipher your posts when they should have taken less than a minute to read. It would be easier on anyone trying to help you if you are clear and concise as to what you are having problems with.
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
Ok im sorry about my bad grammer. Umm the screen does have the micro ide connection from were the dvd player was connected to it and im going to post some pictures in just a second. As for the PSone screen would it be easier? Also how would i go about de-soldering the game cartridge loader as so that i could reposition it within my case?
Edit:
thats the screen.
Edit:
thats the screen.
You Have Been Warned!!!
Spoiler:
Re: I need help with my SnesP
Much better
I am not entirely sure that screen will work, it looks like it takes some sort of digital signal from the DVD player. So unless you want to include the whole DVD player board in your project, a different screen would in fact be easier to wire up.
The easiest way I have found to desolder cart slots would be to use one of these guys. It makes life A LOT easier than having to use braid or some other desoldering tool.
I am not entirely sure that screen will work, it looks like it takes some sort of digital signal from the DVD player. So unless you want to include the whole DVD player board in your project, a different screen would in fact be easier to wire up.
The easiest way I have found to desolder cart slots would be to use one of these guys. It makes life A LOT easier than having to use braid or some other desoldering tool.
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
Oh I see so that basically kills the idea of using that because I dont have room for the entire thing in my case. Also I just found out about a hour ago i have a friend with a PSone screen that he will sell me along with the Psone screen battery pack for a mere $30 . So the question know is how do I wire the snes to the screen could someone post a link to a tutorial on how to do it.
Ps.That desoldering tool looks nice I think i will drop by radioshack and see if i can get one
Ps.That desoldering tool looks nice I think i will drop by radioshack and see if i can get one
You Have Been Warned!!!
Spoiler:
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
Ok i have decided to just have the cartridge loader stick straight out the back lol. Anyways im getting the PsOne screen from my friend and it has a battery pack that will run it so i dont have to worry about that anymore. So can somone recommend a battery than i can run directly to my snes board.
oh and i do have a Li-Ion battery specs in pic below
and this is what my battery looks like its around the size of 12 AA'slol
oh and is that a protection circuit thats on it already i dont know lol
oh and i do have a Li-Ion battery specs in pic below
and this is what my battery looks like its around the size of 12 AA'slol
oh and is that a protection circuit thats on it already i dont know lol
You Have Been Warned!!!
Spoiler:
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
lol s c r e e n is swapped with costume todaysilver wrote:yeh. but does your costume have composite video input??
you can use the batteries though
p o r t a b l e = girlfriend
Last edited by overlordlink on Thu Apr 01, 2010 8:51 pm, edited 1 time in total.
You Have Been Warned!!!
Spoiler:
- overlordlink
- Posts:47
- Joined:Fri Feb 19, 2010 12:11 am
Re: I need help with my SnesP
oh and by the way everyone i just fried my board......
APRIL FOOLS!!!!! lol
happy april 1st everyone
APRIL FOOLS!!!!! lol
happy april 1st everyone
You Have Been Warned!!!
Spoiler:
- nachoz12341
- Posts:124
- Joined:Thu Dec 17, 2009 4:04 pm
Re: I need help with my SnesP
B.E.N is god wo rk is eat and ss is mr hotglue