Sega Justifier mod question.

[humanman42]

Simply, can you mod the first person controller to act as a second player controller. The blue justifier it first player, pink is the second player.

From what I was reading in my Lethal Enforcers manual. there is a special controller for 2nd player that is connected to the player 1 controller, which in turn, is connected to the player 2 porn on the Sega cd.

c'mon, why did it have to be so complicated.

I also found out (while reading the manual), that my hdtv will make it so the light guns wont function properly. Maybe that's why my Sega Saturn gun wasn't working correctly...

I looked around on google, and I always ended up reading about people trying to mod a light gun to work on a radica or something.

Thanks guys and gals.

Casey

[tom61]

I could never find the pinout myself. From what I've heard recently, the pink player 2 gun works with both Genesis and SNES versions of the blue player 1 gun, so it'd likely take internal electronics modding to a blue gun to make it works as a player 2 gun, as the Genesis and SNES use differing protocols for controllers.

[buckwh007]

It is not too hard to make a blue gun operate as a pink gun.

Things you need
Soldering Iron
Wire (the smaller the better)
6-wire phone cord
1 rj-11 end
crimpers that crimp rj-11 ends
blue justifier gun (the one you are moding can be either snes or genesis)

First take The gun apart.
There is a hand full a screws then it just pulls apart
Next take a look at the circuit board.

Here is a shot of the inside

inside gun.png (180.51 KiB) Viewed 5502 times

You will see were the cord is connected on the right hand side and the rj-11 on the bottom side.
You will be soldering to the rj-11 connections on the bottom and on the solder points at the top.
You can remove the original cord by either cutting it off or by de-soldering it.
Next you need to jump 3 wires.
I drew a diagram to show where the wires need to jump.

Here is the wiring diagram

justifier wiring.png (22.61 KiB) Viewed 5502 times

Once those wires are jumped you can put the gun back together.
Next we need to make the cord to join the gun to the 1st player gun.
You will notice that on a phone cord the ends are wired the opposite to each other. I have an example picture below with the before and after.

Here is the example of the phone wiring

Phone wiring.png (25.02 KiB) Viewed 5502 times

We want the wiring to be the same on both ends.
Put a new end on the phone cord.

Now test it out. Everything should work just fine.
I apologize if the tutorial is primitive. It is the first one I have done. If you have any questions please let me know.

[HotDog-Cart]

....the player 1 controller, which in turn, is connected to the player 2 porn on the Sega cd.

[wallydawg]

....the player 1 controller, which in turn, is connected to the player 2 porn on the Sega cd.

I can't even imagine how grainy that would be