Nes Portable Started

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

So, i have started a nes portable, i know everything i need, except how to hook the battery up. I am using http://www.batteryprice.com/sonynp-fm50 ... i-ion.aspx and i just don't know how ben wiredc it up.

Metallica Man X · **Posted:** Thu Aug 19, 2010 9:01 pm

What all are you using in the portable (screen, NES type, ect)?

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

I am going to use a nes mobo, This screen: http://www.buy.com/prod/new-3-5-inch-tf ... 83495.html a 7.2 coolt sony battery, and will build my own sound amplifier.

Metallica Man X · **Posted:** Fri Aug 20, 2010 5:41 pm

Hm. The screen looks similar to those Dealextreme screens out there, so it's probably safe to assume that it's got its own switching regulator in it, so I'm pretty sure you can get away with hooking the battery strait up to it.

I believe the original NES mobo has a 7805 regulator on it, so you should be able to hook the battery straight to that as well (wired in parallel with the screen), with the audio amp piping power from the NES's 7805 regulator (so long as the amp isn't too beefy).

That might run a little warm tho (the 7805) so another option would be an additional regulator running parallel off of the battery going to the amp.

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

yeah, but do i just put wires where the battery contacts are?

nevermind1534 · **Posted:** Fri Aug 20, 2010 9:55 pm

Do you already have all the parts?

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

gettin mobo this week, need to buy the screen, and have the battery.

gamax92 · **Posted:** Sun Aug 22, 2010 2:53 pm

You should wait until all the components are here.

EDIT: What about the controller, charger

EDIT2: do you have a case design

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

have a case design, but i may just run it off of internal batteries, i think i may have room.

edit: this is where the pictures are-http://s594.photobucket.com/albums/tt30/kylerock96/?action=view&current=NESplan.jpg

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

how do i wire a video out jack to it? i want it to be a 1/8 jack

Mcdoodle · **Joined:** Mon Nov 02, 2009 4:51 am **Posts:** 22

First, you need to desolder the RF box if havent done so. Then you have to make a video amp from here to get a decent video output. After that, you just need to wire the jack to the amp and you're done.

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

Its funny, because it was mario's guide that actually made me want to do this, but can i get a pinout for the jack?

kylerock96 · **Joined:** Sun Jul 04, 2010 9:16 pm **Posts:** 73

okay, i changed my plan, i plan on making the smallest nes micro out of the power joy 3. will use a 1.5 inch screen, 4 double a batteries, and a cartridge port.

gamax92 · **Posted:** Sat Sep 11, 2010 5:23 pm

kylerock96 wrote:

okay, i changed my plan, i plan on making the smallest nes micro out of the power joy 3. will use a 1.5 inch screen, 4 double a batteries, and a cartridge port.

HaHaHaHaHa Yeah right. 1.5 inch lol lol lol lol lol lol.

a nine volt battery is a better solution than a 4 double aaa's.

Modddi · **Joined:** Sat Sep 11, 2010 5:19 pm **Posts:** 6

I agree do you really think thats possible.

EDIT: Fixed grammar error

Nes Portable Started

Who is online