How to LED mod the PSONE screen

Moderator: Moderators

How to LED mod the PSONE screen

Postby khaag » Fri May 15, 2009 3:09 am

User avatar
Senior Member
Posts: 2258
Joined: Sat Mar 18, 2006 7:54 pm
Location: C eh N eh D eh

Re: How to LED mod the PSONE screen

Postby Mario » Fri May 15, 2009 10:32 am

Some things have been unclear with the LED mod.

If your LEDs are in series, you only need one resistor.

If they are in parallel, each of them needs their own resistor.

10ohms is too low, you should use around 33ohms.
User avatar
Posts: 1383
Joined: Mon Mar 05, 2007 7:20 pm
Location: Sunny California

Re: How to LED mod the PSONE screen

Postby Basement_Modder » Tue Jun 09, 2009 10:44 pm

Sorry to post in such an old thread, but...

Is it better to wire them in parallel or series? Does it matter?
User avatar
Posts: 961
Joined: Sun Aug 24, 2008 7:16 am
Location: Next door to my neighbor

Re: How to LED mod the PSONE screen

Postby eurddrue » Wed Jun 10, 2009 9:35 pm

I believe it has to be in parrallel because in series the voltages combine and you would need like 12v for 4. I think. :?
Banned indefinitely if you desperately need to contact me STOPPHONESPAMPLOX Please dont be a dick and call for something random like "HEY YURDRUE DOO U HAZ SPAM?"
wallydawg wrote:
chainfire95 wrote:220V I believe

I think we should check to see if you can withstand 220 volts
User avatar
Senior Member
Posts: 2367
Joined: Fri Jul 18, 2008 1:26 pm
Location: I am so caught up in real life I have to be done for a while. I'll still check in but dontexpectmuch

Re: How to LED mod the PSONE screen

Postby marshallh » Mon Jun 15, 2009 10:35 am


Digikey part no. for a new LED I tried with the mod. The color's less blue, brighter, and the LEDs are $1.50 cheaper each than the one Ben recommends.

As always use a 33ohm resistor in series with each LED.
User avatar
Posts: 2986
Joined: Sat Sep 10, 2005 2:17 pm
Location: here and there

Return to Screens

Who is online

Users browsing this forum: No registered users and 1 guest