[SNES]Snes Portable V2 (for sale on ebay)

darthchris13 · **Posted:** Mon Jun 08, 2009 12:32 pm

Hi, i decided to start a new version of snes portable, more little than the first version.I think it will be a litlle bit difficult to enclose all the material inside a little box but i try :mrgreen:

Some pics:

argelfraster · **Joined:** Sun Sep 07, 2008 3:14 pm **Posts:** 929

Nice progress so far :wink:

The screen looks really tiny though....

Rixer 1337 · **Joined:** Sun Mar 29, 2009 5:40 pm **Posts:** 129

The a b x and y buttons look awesome.

XCVG · **Posted:** Tue Jun 09, 2009 9:12 am

Pretty nice. How big is the screen?

Personally I hate those buttons and that dpad, but that's just personal preference. If I built a SNESp it would have Euro/Super Famicom buttons. I LUV DA CULERS!

darthchris13 · **Posted:** Tue Jun 09, 2009 12:42 pm

this is a 2.5", brand new pustom purchased on dealextrem, it works well with signal ntsc, worth with signal pal.It works with a 7,5V battery, good new.
Here is a picture of the screen that i received today.

For the pad and the buttons, i have use an unofficial psone paddle, i got a good felling with pad and buttons, on the rear i can screw easily the pcb of the paddle on the parts blue that you can see on the picture, it is the reason i have choose this paddle, i think the result will be good when it will be painted.

XCVG · **Posted:** Tue Jun 09, 2009 5:25 pm

How good is that screen? I've been thinking of getting a similar one.

Hah, that square symbol looks like the side of a Aperture Science Weighted Storage Cube.

darthchris13 · **Posted:** Wed Jun 10, 2009 10:44 am

i payed this screen 35 dollars and for this price it's not a bad quality, signal NTSC only because it is better than the signal PAL.take care it is baklighted with bulb and not with led.

Life of Brian · **Posted:** Wed Jun 10, 2009 11:33 am

I have one too. They are really easy to hack, aren't they?

Basement_Modder · **Posted:** Wed Jun 10, 2009 11:49 am

You should paint the buttons the PAL snes colors!

darthchris13 · **Posted:** Wed Jun 10, 2009 11:59 am

Basement_Modder wrote:

You should paint the buttons the PAL snes colors!

Maybe, but i think the paint can't resist in a time

Life of Brian wrote:

I have one too. They are really easy to hack, aren't they?

Yes, easy to hack, the pcb is little and easy to install in a box too. have you modify the bulb of the backlight for a leds backlight or it is not neccessary?

samjc3 · **Posted:** Wed Jun 10, 2009 12:05 pm

darthchris13 wrote:

Basement_Modder wrote:

You should paint the buttons the PAL snes colors!

Maybe, but i think the paint can't resist in a time

no. painting buttons never works. fingers act like sand paper. :wink:

Bibin · **Posted:** Thu Jun 11, 2009 1:22 pm

You must stain the buttons or do a really good krylon job for that.

Also, please stop pretending that PAL brought anything good - those colors came from the Japanese SNES first.

darthchris13 · **Posted:** Thu Jun 11, 2009 3:37 pm

Bibin wrote:

You must stain the buttons or do a really good krylon job for that.

Also, please stop pretending that PAL brought anything good - those colors came from the Japanese SNES first.

First test was made with a switched PAL supernintendo and the result on this little screen was bad with signal PAL.

Basement_Modder · **Posted:** Thu Jun 11, 2009 5:50 pm

That's too bad. Is it a PAL screen?

Rixer 1337 · **Joined:** Sun Mar 29, 2009 5:40 pm **Posts:** 129

@basement modder- i think the screen works with both NTSC and PAL

Also, what material are you using for the case?

[SNES]Snes Portable V2 (for sale on ebay)

Who is online