I did stick to the palette. I added one color for black that isn't black, and reused all the rest. any variation from your files is variation of your own account. You shouldn't have recolored the "black" from the capacitors, true black should be reserved for text and borders.XCVG wrote:Here's the SMT Sheet. Made from the N64 board, but it all had to be recoloured because it didn't match the palette. I CANNOT STRESS ENOUGH HOW MUCH YOU SHOULD STICK TO STANDARD COLOURS! It's really a pain to have 40 different grays that are almost but not quite the same. In any case, here's you SMT pack.
Reference Standard Sprites
Moderator:Moderators
- jjhammerstein
- Senior Member
- Posts:1562
- Joined:Tue Nov 18, 2008 7:15 pm
- Location:Southern CT
- Contact:
GET FREE WOW GOLD SEX VISIT MODRETRO
Re: SMT Sheet
Hmmmm, I must have screwed something up. Oh wait no, the blacks and dark greys were fine, it was the light greys on the caps that were slightly off. I don't remember touching the black part of the caps. But then again I might have.jjhammerstein wrote:I did stick to the palette. I added one color for black that isn't black, and reused all the rest. any variation from your files is variation of your own account. You shouldn't have recolored the "black" from the capacitors, true black should be reserved for text and borders.XCVG wrote:Here's the SMT Sheet. Made from the N64 board, but it all had to be recoloured because it didn't match the palette. I CANNOT STRESS ENOUGH HOW MUCH YOU SHOULD STICK TO STANDARD COLOURS! It's really a pain to have 40 different grays that are almost but not quite the same. In any case, here's you SMT pack.
I'll go on a fake black hunt tomorrow.
- limpport
- Senior Member
- Posts:1873
- Joined:Sun Jan 29, 2006 12:32 pm
- Location:(the only person here from) Vermont
- Contact:
Re: Reference Standard Sprites
Made some tact switches, and also the 3 color pallets from the LED's! You can't see the legs on the 2 leg squishy because they are underneath the switch.
Edit: These are to scale. I based them off of the 3mm LED's.
Edit: These are to scale. I based them off of the 3mm LED's.
Last edited by limpport on Tue Nov 03, 2009 10:27 pm, edited 1 time in total.