*computer power supply that can put out at least 12volts @16.5amps and 5volts @1amp ($10-20)
*original nyko intercooler ($5.00 used at gamestop)
first take apart the intercooler, just a few screws markd in red in the picture
next cut the fan wires, and cut off the female connector as shown below
now cut off the 20 pin connector
once that is done, you will need to grab 3 black wires, 3 yellow wires, 1 blue wire, 1 purple wire and (the green and another black wire...keep these separate)
now follow this diagram to solder the wires, dont get confused with the wire color from the intercooler
one black wire for every ground, one yellow wire for every 12 volt, for pin 1 use the blue wire, for pin 2 use the purple wire
in the end it should look something like this
now all you have to do is put a switch between the green wire and a black ground wire, flip the switch and turn on your 360
