PSP GO Dual Nub Solution

[GroundControl]

So my idea here is to use a ps3 controller and replace the right analog stick with a razor x board. this half is done but for the sake of consistency i wanted to use a psp nub on the left analog stick too but ive run into problems mainly because i dont know how to wire it any help?

[weaver]

Your making it harder then it actually is.
Get one of these: http://cgi.ebay.ca/Sony-PSP-1000-System ... 3094wt_932" onclick="window.open(this.href);return false;
and wire the x button to the down pin, o to the right pin, triangle to the up pin and square to the left pin. This way you can use the analog for aiming in shooters instead of the face buttons.

[GroundControl]

Wish i knew that then, i still need to know how to wire the left analog stick

[blaze3927]

Your making it harder then it actually is.
Get one of these: http://cgi.ebay.ca/Sony-PSP-1000-System ... 3094wt_932" onclick="window.open(this.href);return false;
and wire the x button to the down pin, o to the right pin, triangle to the up pin and square to the left pin. This way you can use the analog for aiming in shooters instead of the face buttons.

that is very very wrong

I dont understand what you are trying to do, you want to use the ps3's right analog to map the buttons of psp go's x,[], 0, /\ right?

just do an analog to digital mod on the ps3's joystick

[GroundControl]

Your making it harder then it actually is.
Get one of these: http://cgi.ebay.ca/Sony-PSP-1000-System ... 3094wt_932" onclick="window.open(this.href);return false;
and wire the x button to the down pin, o to the right pin, triangle to the up pin and square to the left pin. This way you can use the analog for aiming in shooters instead of the face buttons.

that is very very wrong

I dont understand what you are trying to do, you want to use the ps3's right analog to map the buttons of psp go's x,[], 0, /\ right?

just do an analog to digital mod on the ps3's joystick

I thought he was wrong.

anyways I have the right analog stick set up and working, I'm having trouble with the left one. I removed the ps3 joystick and I'm trying to use a psp nub.

This is my problem

[blaze3927]

there ya go

[weaver]

How is that wrong? You are trying to add a second analog to your psp right?
The way I explained it is how everyone does it. Just youtube psp dual analog. I don't get why your using a sixaxis controller for this.

[GroundControl]

there ya go

I've tried this before, it did not work

my source: http://www.engadget.com/2006/10/10/how- ... -sony-psp/

[blaze3927]

How is that wrong? You are trying to add a second analog to your psp right?
The way I explained it is how everyone does it. Just youtube psp dual analog. I don't get why your using a sixaxis controller for this.

you are an idiot, you have very misinformed/non existent knowledge in this area and your posts imply you are trying to say otherwise

I've tried this before, it did not work

my source: http://www.engadget.com/2006/10/10/how- ... -sony-psp/

odd, it seems as if the grounding of ps3 controllers is different to that of ps2 ones, therefore it would be difficult to get a psp joystick to work. would you be happy to go back to using the two ps3 analog sticks, with the right analog still mapped as [],/\,0,X ? i could get you the walkthrough/tutorials for doing that if you like

[GroundControl]

odd, it seems as if the grounding of ps3 controllers is different to that of ps2 ones, therefore it would be difficult to get a psp joystick to work. would you be happy to go back to using the two ps3 analog sticks, with the right analog still mapped as [],/\,0,X ? i could get you the walkthrough/tutorials for doing that if you like

How hard would it be to get the psp nub to work?
Ive gotten the up/down movement to work but the left/right is always going.
my wiring (corresponding to the other guide)





I also kinda broke my ps3 analog sticks getting them out :/
When i started this project on another forum they said i couldn't wire [] /\ X O to the left analog stick for some reason but it sounded like bull anyways

[GroundControl]

odd, it seems as if the grounding of ps3 controllers is different to that of ps2 ones, therefore it would be difficult to get a psp joystick to work. would you be happy to go back to using the two ps3 analog sticks, with the right analog still mapped as [],/\,0,X ? i could get you the walkthrough/tutorials for doing that if you like

hey can i get that guide?

[blaze3927]

woops sorry missed the post.
looking for it now, it was on acidmods somewhere

[blaze3927]

potentiometer mod
first remove the pots on the side of the ps3's analog,
then cut the traces on the inside, this is a diagram.

will post more if more explanation required

[GroundControl]

All Done! thanks Blaze for the help

i'll put a video of it in action if you guys want to see

[blaze3927]

video please
always nice to watch finished mods in action