ps2 slim battery question, need HELP please

manu.le.ouf · **Joined:** Fri Jun 01, 2012 11:02 am **Posts:** 23

Hello, the ps2 slim work on 8.5v but I want use 3.7v PO-LI battery, 3 of them give me 11.1v, if I use the original AC 8.5 adaptator, the ps2 will work ?? I want use this battery:
http://www.batteryspace.com/polymerli-i ... arate.aspx
or
http://www.batteryspace.com/polymerli-i ... isted.aspx
Thank you for answer me

hailrazer · **Posted:** Fri Jun 29, 2012 3:24 pm

If I remember correctly the PS2 Slim's power does not go to a regulator so I think 9v is the max it will take.

But you can use a standard 7808 regulator to get 8v.

Or you can get a certain Revision PS2 slim that runs just fine on 7.4v

manu.le.ouf · **Joined:** Fri Jun 01, 2012 11:02 am **Posts:** 23

thank you, can you give me a little tutorial to solder the 7808 regulator on the system please ?
And can you confirm me that this battery work with the ps2 slim ?

ProgMetalMan · **Joined:** Sat Feb 05, 2011 8:18 pm **Posts:** 239

Yes, but you'll need 3 of 'em. The second is bigger but will give you 1.5x the life, and you'll also need an 11.1V protection circuit and smart charger.

manu.le.ouf · **Joined:** Fri Jun 01, 2012 11:02 am **Posts:** 23

Okay thank you for this information

Can you show me how I must use the 7808 regulator please ?

manu.le.ouf · **Joined:** Fri Jun 01, 2012 11:02 am **Posts:** 23

Can I use this DC-DC regulator Module to use 3 Li-Po 3.7v battery, so 11.1v on ps2 slim (8.5v) ?
http://www.batteryspace.com/dc-dcregula ... 5amax.aspx

ProgMetalMan · **Joined:** Sat Feb 05, 2011 8:18 pm **Posts:** 239

I don't think it puts out enough amps.

ps2 slim battery question, need HELP please

Who is online