After finishing my portable and it being an ugly little piece of awesome, I decided to spruce it up! I added a nice layer of construction paper to give it a single color. Came out good in my opinion!!
Last edited by Sharp Sapphire on Tue May 27, 2008 4:50 pm, edited 1 time in total.
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit
I did some more adjustments, the batteries are officially internal! I never have to take them out, I added a charge jack on the bottom! I also trimmed up around the screen... looks TONS better now!
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit
One technique you will be pleased you did is to remove the existing covering, use it as a template to cut better and more exact holes in, get the cut-out around the screen crisp and apply that piece of thin paper to the case, tightly; folding the corners like you would wrapping an Xmas parcel. That will look better than your pic; although same principle.
bacteria wrote:One technique you will be pleased you did is to remove the existing covering, use it as a template to cut better and more exact holes in, get the cut-out around the screen crisp and apply that piece of thin paper to the case, tightly; folding the corners like you would wrapping an Xmas parcel. That will look better than your pic; although same principle.
Thats not possible without tearing up the cardboard-- its hotglued in there to no tomarrow.. .EVERYTHING is hotglued.
Things I need to purchase for my NES Laptop:
1X PSone screen
6X 1.2v 3500mAh sub-C's
1X 1/8'' to RCA stereo Adapater
1X Radioshack repair kit