Sorry I couldn't make a video, but you wouldn't be able to see anything because of the horrible glare on the screen. Here's a picture of the cartridge.
![Image](http://i534.photobucket.com/albums/ee342/stuntpenguin007/100_2284.jpg)
To do this, I desoldered the SRAM chip (the one on the bottom left), and replaced it with a non-volatile FM28V020 FRAM chip. The FM28V020 doesn't require a battery to retain it's memory, and it has the same footprint as the SRAM chip that was in the cartridge so no fancy rewiring is needed. I figured this out by accident, but in order to make this mod work, you need to lift the top right pin of the FRAM and leave it disconnected.
I have a good feeling that this would work in n64 memory cards too. It just wouldn't be multi-bank (like Kibble's non-volatile n64 memory card mod)
If you decide to do this mod, please buy the chip as opposed to ordering a sample of it. It's totally up to you, but these companies can't keep making quality products if their not making any money
![Wink :wink:](./images/smilies/icon_wink.gif)